SIL10E Series
S i n g l e o u t p u t
DC/DC CONVERTERS E Class Non-isolated
1
• 10A Current rating
• Input voltage range: 3.0V - 5.5V
NEW Product
• Output voltage range: 0.8V - 3.63V
• Ultra high efficiency: 95% @ 5Vin and 3.3Vout
• Extremely low internal power dissipation
• Minimal thermal design concerns
• Designed in reliability: MTBF of >7 million hours
per Telcordia SR-332
• Ideal solution where board space is at a premium
or tighter card pitch is required
• Industry standard footprint and pin out
The SIL±1E series are non-isolated Dº/Dº converters packaged in a single-in-line footprint
giving designers a cost effective solution for conversion from either a 5V or a 3.3V source.
The SIL±1E offers a range of fixed outputs and one wide trim output unit at an industry
leading ±1A which allows maximum design flexibility and a pathway for future upgrades.
The SIL±1E is designed for applications that include distributed power, workstations, optical
network and wireless applications. Implemented using state of the art surface mount
technology and automated manufacturing techniques, the SIL±1E offers compact size and
efficiencies of up to 950.
2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
SPECIFICATIONS
OUTPUT SPECIFICATIONS
EMC CHARACTERISTICS
Voltage adjustability
Fixed output versions
5Vin with wide trim
3.3Vin with wide trim
±±10
3.6V to 1.8V
2.75V to 1.8V
Electrostatic discharge
ºonducted immunity
Radiated immunity
EN6±111-4-2, IEº81±-2
EN6±111-4-6
EN6±111-4-3
Setpoint accuracy
Line regulation
±2.70
±±.10
±±.10
1A
GENERAL SPECIFICATIONS
Efficiency
See table
Non-isolated
311kHz typ.
Load regulation
Minimum load
Insulation voltage
Switching frequency
Fixed
Overshoot/undershoot
None
Approvals and
standards
EN61951
UL/cUL61951
Ripple and noise
1 to 21MHz BW
51mV pk-pk
25mV rms max.
Material flammability
UL94V-1
Temperature co-efficient
Transient response
±1.1±0/ꢀº
Dimensions
(Vertical version)
(LxWxH)
Vertical
51.8 x 7.8 x ±2.7mm
2.1 x 1.3± x 1.5 inches
51mV max. deviation
51µs recovery to
within ±±.10
Pin length
Weight
1.±35 ±1.12 in (3.43 ±1.5mm)
5g (1.±8oz)
Remote sense
±10 Vo compensation
MTBF
Telcordia SR-332
7,142,111
INPUT SPECIFICATIONS
Input voltage range
Input current
3.1 to 5.5VDº
71mA
ENVIRONMENTAL SPECIFICATIONS
No load
Thermal performance
Operating ambient,
(See Note 2)
Non-operating
-41ꢀº to +±11ꢀº
-41ꢀº to +±25ꢀº
Input current (max.)
8A max. @ Io max.
and Vout = 3.3V
Input current ripple
Remote ON/OFF
Start-up time
65mA rms
(See Note ±)
21ms
PROTECTION
Short-circuit protection
Thermal protection
ºontinuous
Automatic recovery
International Safety Standard Approvals
UL/cUL ºAN/ºSA 22.2 No. E±74±14
UL61951 file No. E±74±14
TÜV
TÜV Product Service (EN61951) ºertificate No. B12 ±2 38572 135
ºB report and certificate to IEº61951
File Name: sil±1e.pdf Rev: 27 Feb 2113