SID11x2K
SCALE-iDriver Family
Up to 8 A Single Channel IGBT/MOSFET Gate Driver
Providing Reinforced Galvanic Isolation
Product Highlights
Description
Highly Integrated, Compact Footprint
• Split outputs providing up to 8 A peak drive current
• Integrated FluxLink™ technology providing safe isolation between
primary-side and secondary-side
The SID11x2K is a single channel IGBT and MOSFET driver in an
eSOP package. Reinforced galvanic isolation is provided by Power
Integrations’ innovative solid insulator FluxLink technology. The up to
8 A peak output drive current enables the product to drive devices up
to 450 A (typical) without requiring any additional active components.
For gate drive requirements that exceed the stand-alone capability of
the SID1182K’s, an external amplifier (booster) may be added. Stable
positive and negative voltages for gate control are provided by one
unipolar isolated voltage source.
• Rail-to-rail stabilized output voltage
• Unipolar supply voltage for secondary-side
• Suitable for 600 V / 650 V / 1200 V IGBT and MOSFET switches
• Up to 250 kHz switching frequency
• Low propagation delay time 260 ns
• Propagation delay jitter ±5 ns
• -40 °C to 125 °C operating ambient temperature
• High common-mode transient immunity
Additional features such as short-circuit protection (DESAT) with
Advanced Soft Shut Down (ASSD), undervoltage lock-out (UVLO) for
primary-side and secondary-side and rail-to-rail output with tempera-
ture and process compensated output impedance guarantee safe
operation even in harsh conditions.
• eSOP package with 9.5 mm creepage and clearance
Advanced Protection / Safety Features
• Undervoltage lock-out protection for primary and secondary-side
(UVLO) and fault feedback
• Short-circuit protection using VCESAT monitoring and fault feedback
• Advanced Soft Shut Down (ASSD)
Controller (PWM and fault) signals are compatible with 5 V CMOS logic,
which may also be adjusted to 15 V levels by using external resistor divider.
Product Portfolio
Full Safety and Regulatory Compliance
• 100% production partial discharge test
• 100% production HIPOT compliance testing at 6 kV RMS 1 s
• Reinforced insulation meets VDE 0884-10
Product1
SID1112K
SID1132K
SID1152K
SID1182K
Peak Output Drive Current
1.0 A
2.5 A
5.0 A
8.0 A
Green Package
• Halogen free and RoHS compliant
Applications
• General purpose and servo drives
• UPS, solar, welding inverters and power supplies
Table 1. SCALE-iDriver Portfolio.
Notes:
1. Package: eSOP-R16B.
Figure 2. eSOP-R16B Package.
SCALE-iDriver
VCE
Primary-Side
Logic
Secondary-Side
Logic
VGXX
IN
VISO
GH
Fault
Output
SO
ꢈTOT
ꢀ
-
VIN
VCC
Fluꢉꢊinꢋ
GL
ꢈꢈCC
ꢀ
-
GND
VEE
COM
PIꢀꢁꢂꢃꢂꢀꢄꢁꢅꢆꢇꢆ
Figure 1. Typical Application Schematic.
www.power.com
May 2018
This Product is Covered by Patents and/or Pending Patent Applications.
5秒后页面跳转
深入解析AD7606高性能多通道模数转换器：资料手册参数分析
74HC573三态非易失锁存器(Latch)资料手册参数分析
MAX3232 RS-232电平转换器资料手册参数分析
MAX485 RS-485/RS-422收发器资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
