Si1145/46/47-M01
PROXIMITY/UV/AMBIENT LIGHT SENSOR MODULE WITH
I2C INTERFACE
Features
Pin Assignments
Integrated infrared proximity detector
Proximity detection adjustable from
under 1 cm to over 50 cm
Three independent LED drivers
15 current settings from 5.6 mA to
360 mA for each LED driver
25.6 µs LED driver pulse width
50 cm proximity range with single
pulse (<3 klx)
15 cm proximity range with single
pulse (>3 klx)
Operates at up to 128 klx (direct
sunlight)
Accurate lux measurements with IR
correction algorithm
Industry's lowest power consumption
1.71 to 3.6 V supply voltage
9 µA average current (LED pulsed
25.6 µs every 800 ms at 180 mA
plus 3 µA Si1145/46/47-M01
supply)
< 500 nA standby current
Internal and external wake support
Built-in voltage supply monitor and
power-on reset controller
Si114x-M01
DNC 1
SDA 2
SCL 3
VDD 4
INT 5
10 LEDA
9
LED1
8
7
6
GND
LED3/CVDD
LED2/CVDD
25.6 µs LED “on” time keeps total
power consumption duty cycle low
without compromising performance
or noise immunity
High reflectance sensitivity
2
< 1 µW/cm
High EMI immunity without shielded
packaging
Integrated UV index sensor
Integrated ambient light sensor
100 mlx resolution possible,
allowing operation under dark glass
IR LED integrated inside the module
2
I C Serial communications
Up to 3.4 Mbps data rate
Slave mode hardware address
decoding (0x60)
1 to 128 klx dynamic range possible Small-outline 10-lead
across two ADC range settings
4.9x2.85x1.2 mm QFN
Temperature Range
–40 to +85 °C
Applications
Handsets
Portable consumer electronics
Touchless switches
Touchless sliders
Consumer electronics
Display backlighting control
Heart rate monitoring
Pulse oximetry
Wearables
E-book readers
Notebooks/Netbooks
Description
The Si1145/46/47-M01 is a low-power, reflectance-based, proximity, UV Index and
ambient light module with integrated single IR LED, two additional LED driver
2
outputs, I C digital interface, and programmable-event interrupt output. This
touchless sensor module includes an analog-to-digital converter, integrated high-
sensitivity visible and infrared photodiodes, digital signal processor, and three
integrated infrared LED drivers with fifteen selectable drive levels. The Si1145/46/47-
M01 offers excellent performance under a wide dynamic range and a variety of light
sources including direct sunlight. The Si1145/46/47-M01 can also work under dark
glass covers. The photodiode response and associated digital conversion circuitry
provide excellent immunity to artificial light flicker noise and natural light flutter noise.
With two or more LEDs, the Si1145/46/47-M01 is capable of supporting multiple-axis
proximity motion detection. The Si1145/46/47-M01 devices are provided in a 10-lead
4.9x2.85x1.2 mm QFN package and are capable of operation from 1.71 to 3.6 V over
the –40 to +85 °C temperature range.
Rev. 1.0 11/14
Copyright © 2014 by Silicon Laboratories
Si1145/46/47-M01