Si1141/42/43-M01
2
PROXIMITY/AMBIENT LIGHT SENSOR MODULE WITH I C INTERFACE
Features
Pin Assignments
Integrated infrared proximity detector
Proximity detection adjustable from
under 1 cm to over 50 cm
Three independent LED drivers
15 current settings from 5.6 mA to
360 mA for each LED driver
25.6 µs LED driver pulse width
50 cm proximity range with single
pulse (<3 klx)
15 cm proximity range with single
pulse (>3 klx)
Operates at up to 128 klx (direct
sunlight)
Industry's lowest power consumption
1.71 to 3.6 V supply voltage
25.6 µs LED “on” time keeps total
power consumption duty cycle low
without compromising performance
or noise immunity
9 µA average current (LED pulsed
25.6 µs every 800 ms at 180 mA
plus 3 µA Si1141/42/43-M01 supply)
< 500 nA standby current
Internal and external wake support
Built-in voltage supply monitor and
power-on reset controller
Single IR LED integrated inside the
module
Serial communications
Up to 3.4 Mbps data rate
Slave mode hardware address
decoding (0x5A)
Si1141/42/43-M01
DNC 1
10 LEDA
SDA 2
SCL 3
VDD 4
INT 5
9 LED1
8 GND
7 LED3/CVDD
6 LED2/CVDD
High reflectance sensitivity
2
< 1 µW/cm
High EMI immunity without shielded
packaging
Integrated ambient light sensor
100 mlx resolution possible, allowing
operation under dark glass
1 to 128 klx dynamic range possible
across two ADC range settings
Accurate lux measurements with IR
correction algorithm
Small-outline 10-lead
4.9x2.85x1.2 mm QFN
Temperature Range
–40 to +85 °C
Applications
Handsets
Heart rate monitoring
Pulse oximetry
Dispensers
Valve controls
Smoke detectors
Touchless switches
Touchless sliders
Occupancy sensors
Consumer electronics
Industrial automation
Display backlighting control
E-book readers
Notebooks/Netbooks
Portable consumer electronics
Audio products
Security panels
Tamper detection circuits
Description
The Si1141/42/43-M01 is a low-power, reflectance-based, infrared proximity and
ambient light module with integrated single IR LED, two additional LED driver outputs,
2
I C digital interface, and programmable-event interrupt output. This touchless sensor
module includes an analog-to-digital converter, integrated high-sensitivity visible and
infrared photodiodes, digital signal processor, and three integrated infrared LED
drivers with fifteen selectable drive levels. The Si1141/42/43-M01 offers excellent
performance under a wide dynamic range and a variety of light sources including direct
sunlight. The Si1141/42/43-M01 can also work under dark glass covers. The
photodiode response and associated digital conversion circuitry provide excellent
immunity to artificial light flicker noise and natural light flutter noise. With two or more
LEDs, the Si1141/42/43-M01 is capable of supporting multiple-axis proximity motion
detection. The Si1141/42/43-M01 devices are provided in a 10-lead 4.9x2.85x1.2 mm
QFN package and are capable of operation from 1.71 to 3.6 V over the –40 to +85 °C
temperature range.
Rev. 1.1 12/14
Copyright © 2014 by Silicon Laboratories
Si1141/42/43-M01