Si1141/42/43
2
PROXIMITY/AMBIENT LIGHT SENSOR IC WITH I C INTERFACE
Features
Pin Assignments
Integrated infrared proximity detector
Proximity detection adjustable from
under 1 cm up to 200 cm
Accurate lux measurements with IR
correction algorithm
DNC
10
Industry's lowest power consumption
1.71 to 3.6 V supply voltage
9 µA average current (LED pulsed
25.6 µs every 800 ms at 180 mA
plus 3 µA Si114x supply)
< 500 nA standby current
25.6 µs LED “on” time keeps total
power consumption duty cycle low
without compromising performance
or noise immunity
Three independent LED drivers
15 current settings from 5.6 mA to
360 mA for each LED driver
25.6 µs LED driver pulse width
50 cm proximity range with single
pulse (<3 klx)
15 cm proximity range with single
pulse (>3 klx)
Operates at up to 128 klx (direct
sunlight)
1
2
3
4
9
8
7
6
SDA
SCL
LED1
GND
QFN-10
LED3/CVDD
LED2/CVDD
VDD
INT
5
DNC
Internal and external wake support
Built-in voltage supply monitor and
power-on reset controller
High reflectance sensitivity
2
< 1 µW/cm
High EMI immunity without shielded
packaging
Serial communications
Up to 3.4 Mbps data rate
Slave mode hardware address
decoding (0x5A)
Small-outline 10-lead 2x2 mm QFN
Temperature Range
Integrated ambient light sensor
100 mlx resolution possible,
allowing operation under dark glass
1 to 128 klx dynamic range possible
across two ADC range settings
–40 to +85 °C
Applications
Handsets
Valve controls
Smoke detectors
Touchless switches
Touchless sliders
Occupancy sensors
Consumer electronics
Industrial automation
Display backlighting control
Photo-interrupters
Heart rate monitoring
Pulse oximetry
Wearables
Audio products
Security panels
Tamper detection circuits
Dispensers
Description
The Si1141/42/43 is a low-power, reflectance-based, infrared proximity and ambient
light sensor with I2C digital interface and programmable-event interrupt output. This
touchless sensor IC includes an analog-to-digital converter, integrated high-
sensitivity visible and infrared photodiodes, digital signal processor, and one, two, or
three integrated infrared LED drivers with fifteen selectable drive levels. The Si1141/
42/43 offers excellent performance under a wide dynamic range and a variety of light
sources including direct sunlight. The Si1141/42/43 can also work under dark glass
covers. The photodiode response and associated digital conversion circuitry provide
excellent immunity to artificial light flicker noise and natural light flutter noise. With
two or more LEDs, the Si1142/43 is capable of supporting multiple-axis proximity
motion detection. The Si1141/42/43 devices are provided in a 10-lead 2x2 mm QFN
package and are capable of operation from 1.71 to 3.6 V over the –40 to +85 °C
temperature range.
Rev. 1.41 5/15
Copyright © 2015 by Silicon Laboratories
Si1141/42/43