SGSA-S Series Enclosures
Datasheet
SGSA-S Series Enclosures for the mounted protection of SGS Grid Sensors and mirrors
•
•
•
•
•
•
Eight models available: four with corner mirrors, four to house SGS Grid Sensors
Models meet ANSI/RIA 15.06 and ISO 13855 standards for beam spacing
Robust aluminum housing with a tough safety yellow finish
Independently adjustable mirrors to simplify alignment
Circular bubble level on top of enclosure with three leveling screws in base
Base allows enclosure to rotate up to 20°
Banner SGSA-S Series Enclosures are designed specifically for use with Banner SGS Grid models. The enclosures are constructed of a powder
coated extruded aluminum housing with an anodized aluminum top plate and mounting base. The enclosures have leveling and rotational positioning
capabilities. Units with mirrors have three adjustment screws per mirror to optimize beam direction. The enclosures are available in eight different
models to accommodate ANSI/RIA 15.06 and ISO 13855 beam spacing standards. The rear-surfaced glass mirrors are rated at 85% efficiency per
mirror and reduce maximum range by 8% per mirror.
Important: Reduced Sensing Range—Sensing range is reduced to 85% efficiency per mirror (8% range per mirror).
WARNING:
•
•
Maintain the required separation distance
Failure to calculate this distance correctly and to maintain minimum separation distance can result in serious injury or
death.
•
The light screen produced by the optical safety system sensors must be placed at a minimum safe distance from the
dangerous motion of the machine being guarded. This necessary minimum distance is called the separation distance
and is discussed in the appropriate Grid manuals.
Models
Number of
Windows
Distance From Floor to
Bottom Window L2
Distance Between
Beams L3
Models
SGS Grid Models
SGSxx4-300Qxx
SGSxx3-400Qxx
SGSxx4-400Qxx
SGSxx2-500Qxx
Enclosure Height L1
1543 mm (60.75 in)
1238 mm (48.78 in)
1618 mm (63.69 in)
1035 mm (40.75 in)
Protected Height
900 mm (35.4 in)
800 mm (31.5 in)
1200 mm (47.2 in)
500 mm (19.7 in)
Application Standard
SGSA4-S300
ANSI/RIA R15.06
ISO 13855
4
3
4
2
300 mm (11.8 in)
300 mm (11.8 in)
300 mm (11.8 in)
400 mm (15.8 in)
300 mm (11.8 in)
400 mm (15.8 in)
400 mm (15.8 in)
500 mm (19.7 in)
SGSA4-S300-M
SGSA3-S400
ANSI/RIA R15.06
ISO 13855
SGSA3-S400-M
SGSA4-S400
ANSI/RIA R15.06
ISO 13855
SGSA4-S400-M
SGSA2-S500
ANSI/RIA R15.06
ISO 13855
SGSA2-S500-M
Model numbers with suffix -M include vertical mirrors for perimeter-guarding applications. For L1, L2, and L3 locations, see Figure 1 on page 1.
Install the Enclosure
145 mm
(5.7")
L3
L2
2X 120
3X 20
15
6X R6.60 mm
R (0.26")
Ø 177.8 mm
(7.00")
3X R83.8 mm
(3.30")
L1
Figure 1. SGSA-S enclosure dimensions
Figure 2. Base dimensions
Original Document
109308 Rev. C
12 April 2019
109308