SGM9114
8MHz, 5th-Order Video Driver
with 6dB Gain
GENERAL DESCRIPTION
FEATURES
The SGM9114 is a single rail-to-rail 5th-order output
reconstruction filter with a -3dB bandwidth of 8MHz and
35V/µs slew rate. Operating from single power supply
ranging from 3.0V to 5.5V and sinking an ultra-low 6mA
quiescent current, the SGM9114 is ideally suited for
low power, battery-operated applications.
Excellent Video Performance
5th-Order Reconstruction Filter
Internal Gain: 6dB
Rail-to-Rail Output
SAG Correction Reduces AC Coupling
Capacitor Size
Input Voltage Range Includes Ground
AC- and DC-Coupled Input
Single Power Supply: 3.0V to 5.5V
SGM9114 employs an internal level shift circuit that
avoids sync-pulse clipping and allows DC-coupled
output. If AC coupling is preferred, the SGM9114 offers
a sag-correction feature that significantly reduces the
size of the output coupling capacitor.
Low Power
6mA Typical Supply Current
0.1μA Typical Supply Current when Disabled
Available in Green SOT-23-6 Package
-40℃ to +85℃ Operating Temperature Range
SGM9114 has a power-down disable feature that
reduces the supply current to 0.1μA, dramatically
reducing power consumption and prolonging battery
life.
APPLICATIONS
It operates over an ambient temperature range of -40℃
to +85℃.
Video Amplifiers
Cable and Satellite Set-Top Boxes
Communication Devices
Video on Demand
BLOCK DIAGRAM
To External Power
Supply or Control I/O
VCC = 3.0V to 5.5V
Portable and Handheld Products
Personal Video Recorders
DVD Players
10kΩ
VCC
Level
DISABLE
HDTV
Shifter
5th-Order
Filter
IN
OUT
SAG
6dB
SGM9114
GND
NOTES:
1. A 10kΩ resistor must be serially connected to
DISABLE
pin.
2. Power supply VCC must be sequenced on first before input
video signals.
REV. B. 1
SG Micro Corp
www.sg-micro.com