SGM790A/SGM790B/SGM790C
Dual Load Detectors
with 300nA Operating Current
GENERAL DESCRIPTION
FEATURES
The SGM790A, SGM790B and SGM790C are low
current, dual load sensing devices that can detect
connection or removal of the loads on a supply bus. By
using short pulse injections into the input capacitance
and measuring the voltage change, load existence is
periodically checked.
● 2.5V to 5.5V Operating Voltage Range
● Very Low Operating Current: 300nA (TYP)
● Two Independent Detection Channels
● 1.3s Wake-Up Output Signal (SGM790A/SGM790C)
● 160ms Detection Period
● Available in a Green UTDFN-1.2×1.2-6L Package
The SGM790A and SGM790C provide wake-up output
pins, denoted by WKP and nWKP respectively. The logic
levels of the SGM790C are completely the opposite of
the SGM790A. When a load attachment or detachment
is sensed, a pulse (1.3s, TYP) is generated on WKP
(nWKP) pin to report the status change or to awaken the
host. The bidirectional WKP (nWKP) pin is also used as
a selection input pin to choose either SNS1 or SNS2
channel. The detection status of SNSx channel is
reported on the FLG output pin during the 1.3s window.
In the SGM790B, the most recent detection status of
SNSx channel is reported on the corresponding FLGx
channel output.
APPLICATIONS
Power Bank
Powered Storage Box
Low Standby Power Cord Supply
These devices are available in a Green UTDFN-1.2×
1.2-6L package, and can operate in the ambient
temperature range of -40℃ to +85℃.
TYPICAL APPLICATION
VBAT
VBAT
SGM66099
Low IQ 5V Boost
SGM66099
Low IQ 5V Boost
EN
EN
B2
B2
Power Supply Circuit
Power Supply Circuit
C2
C2
100nF ~ 1μF
+
-
100nF ~ 1μF
+
-
VBAT
VBAT
GPIO
GPIO
IO1
IO
Status Reading
Wake-Up
Status Reading
ESD2
ESD2
B1
B1
MCU
MCU
IO2
Status Reading
Wake-Up
IO
Wake-Up
ESD1
ESD1
C1
C1
100nF ~ 1μF
100nF ~ 1μF
+
-
SGM790A/C
+
-
SGM790B
Figure 1. Typical Application Circuits
SG Micro Corp
www.sg-micro.com
DECEMBER2020–REV. A