SGM321/SGM358/SGM324
1MHz, 60μA, Rail-to-Rail I/O
CMOS Operational Amplifiers
GENERAL DESCRIPTION
FEATURES
The SGM321 (single), SGM358 (dual) and SGM324
(quad) are low cost, rail-to-rail input and output voltage
feedback amplifiers. They have a wide input common
mode voltage range and output voltage swing, and take
the minimum operating supply voltage down to 2.1V.
The maximum recommended supply voltage is 5.5V.
All are specified over the extended -40℃ to +85℃
temperature range.
• Low Cost
• Rail-to-Rail Input and Output
0.8mV Typical VOS
• Unity Gain Stable
• Gain-Bandwidth Product: 1MHz
• Very Low Input Bias Current: 10pA
• Supply Voltage Range: 2.1V to 5.5V
• Input Voltage Range:
-0.1V to +5.6V with VS = 5.5V
The SGM321/358/324 provide 1MHz bandwidth at a
low current consumption of 60μA per amplifier. Very
lowinputbias currents of10pAenable SGM321/358/324
to be used for integrators, photodiode amplifiers, and
piezoelectric sensors. Rail-to-rail input and output are
useful to designers for buffering ASIC in single-supply
systems.
• Low Supply Current: 60μA/Amplifier
• Small Packaging
SGM321 Available in SOT-23-5 and SC70-5
SGM358 Available in SOIC-8, MSOP-8 and DIP-8
SGM324 Available in SOIC-14 and TSSOP-14
APPLICATIONS
Applications for this series of amplifiers include safety
monitoring, portable equipment, battery and power
supply control, and signal conditioning and interfacing
for transducers in very low power systems.
ASIC Input or Output Amplifier
Sensor Interface
Piezoelectric Transducer Amplifier
Medical Instrumentation
Mobile Communication
Audio Output
The SGM321 is available in the Green SOT-23-5 and
SC70-5 packages. The SGM358 comes in the Green
SOIC-8, MSOP-8 and DIP-8 packages. The SGM324 is
offered in the Green SOIC-14 and TSSOP-14
packages.
Portable Systems
Smoke Detectors
Notebook PC
PCMCIA Cards
Battery-Powered Equipment
DSP Interface
SG Micro Corp
MARCH2017–REV.E. 1
www.sg-micro.com