NOTES:
C
REVISION DC
SFM-1XX-XX-XXX-D-XXX
1.
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: .5 LB.
OPTIONS
No OF POSITIONS
ALL POSITIONS AVAILABLE
3. COPLANARITY: .004[0.10] = POS 05 THRU 26
.006[0.15] = POS 27 THRU 50
(LEAVE BLANK FOR STANDARD
DO NOT
SCALE FROM
THIS PRINT
4. TUBE ALL POSITIONS. PARTS TO BE TUBED WITH
NOTCH GOING WITH ARROW.
AND USE SFM-XX-D)
-02 THRU -50
-N: NO POLARIZATION NOTCH
(USE SFM-XX-D-XX-N)
(USE BODY: SFM-XX-D-XX-X)
5. PINS CAN BE ORIENTED IN ANY DIRECTION;
BOTH ROWS MUST FACE SAME WAY.
-A: ALIGNMENT PIN (USE SFM-XX-D-A-X)
(SEE FIG 4, SHT 2)
6. SEE NOTCH FOR PROPER ORIENTATION.
7. MAXIMUM PIN HEIGHT VARIATION: .003[0.08].
8. DUE TO HIGH AMOUNT OF INSERTION FORCE
NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH
AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL
PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
LEAD STYLE
-01: THROUGH HOLE
-LC: LOCKING CLIP (SEE FIG 6, SHT 3 & NOTE 8)
(AVAILABLE ON ALL LEADS)
(USE CONTACT: C-44-01-XXX)
(SEE FIG 1, SHT 1)
-P: PICK AND PLACE PAD
(SEE FIG 5, SHT 2)
-02: SURFACE MOUNT
-TR: TAPE & REEL (SEE SHT 4)
(USE CONTACT: C-44-02-XXX)
(SEE FIG 2, SHT 2)
(NOT AVAILABLE WITH -DS OPTION)
-K: POLYIMIDE FILM PAD (.005[0.13] THICKNESS)
(SEE FIG 3, SHT 2) (USE K-DOT-.157-.250-.005)
-SN: SOLDER NAIL FOR .062 BOARD
(SFM-XX-D-SN AND WT-27-01-T)
(AVAILABLE WITH LEAD STYLE -02, -L2 & -T2)
(NOT AVAILABLE WITH -A & -LC)
-SN2: SOLDER NAIL FOR .093 BOARD
(SFM-XX-D-SN AND WT-27-02-T)
(AVAILABLE WITH LEAD STYLE -02, -L2 & -T2)
(NOT AVAILABLE WITH -A & -LC)
-DS: DUAL SCREW DOWN FOR .062 BOARD
(SEE FIG 8, SHT 3)
-03: STRAIGHT MODIFIED
(USE CONTACT: C-44-03-XXX)
(SEE FIG 1, SHT 1)
*: DIMENSIONS N/A FOR -N OPTION
-L1: THROUGH HOLE (LOW INSERTION)
(USE CONTACT: C-61-01-XXX)
(SEE FIG 1, SHT 1)
*.145 3.68 REF
-L2: SURFACE MOUNT (LOW INSERTION)
(USE CONTACT: C-61-02-XXX)
(SEE FIG 2, SHT 2)
*.020 0.51 REF
.120 3.05 REF
*.080 2.03 REF
-L3: STRAIGHT MODIFIED (LOW INSERTION)
(USE CONTACT: C-61-03-XXX)
(SEE FIG 1, SHT 1)
.050 1.27 REF
02
(ONLY AVAILABLE WITH -01, -02 AND -03 LEAD
STYLE, 02 THRU 40 POSITIONS)
(NOT AVAILABLE WITH OPTIONS -N, -A, -LC, -P,
-TR, -K, -SN AND SN2), (USES SFM-XX-D-DS,
CPS-RR-XX-XX-X, ACCRT-01 AND WT-27-XX-T
ALWAYS FILLED)
-T1: THROUGH HOLE (PHOS BRONZE)
(USE CONTACT: C-119-01-XXX)
(SEE FIG 1, SHT 1)
C
L
-T2: SURFACE MOUNT (PHOS BRONZE)
(USE CONTACT: C-119-02-XXX)
(SEE FIG 2, SHT 2)
01
C
L
.050 1.27 REF
BODY SPECIFICATION
-D: DOUBLE ROW
(NO. OF POS x .050[1.27]) + .015[0.38] REF
(NO. OF POS x .050[1.27]) + .155[3.94] REF
PLATING SPECIFICATION
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
C
L
SFM-XX-D-LC-X
MATTE TIN ON TAIL
"A"
"A"
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
C-XX-01-XXX
(SEE NOTE 5)
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
.180 4.57 REF
.015 0.38 REF
.110 2.79 REF
-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA,
TIN/LEAD (90/10+/-5%) TAIL
(ONLY AVAILABLE ON -02 OR -L2 LEADSTYLES)
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
"A"
C
L
(SEE TABLE 1)
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
2
MAX SWAY (TYP)
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
"B" REF
.050 1.27
.005 0.13 REF
(NO. OF POS x .050[1.27]) - .050[1.27] REF
1
MAX
SWAY (TYP)
SECTION "A"-"A"
FIG 1
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
THROUGH HOLE/STRAIGHT MODIFIED
TOLERANCES ARE:
DECIMALS
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XXX: .005 [.13]
.XXXX: .0020 [.051]
SHEET SCALE: 3:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
.050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY
INSULATOR: LCP, COLOR: BLACK
CONTACT: TIGER EYE = BeCu
DWG. NO.
TIGER EYE LITE = PHOSPHOR BRONZE
SFM-1XX-XX-XXX-D-XXX
BY:
JORDAN 12/11/89
SHEET 1 OF 4
F:\DWG\MISC\MKTG\SFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW
5秒后页面跳转
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
纳微科技震撼发布GaNSlim革新氮化镓功率芯片
意法半导体发布第四代SiC技术，助力电动汽车电驱
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
