Datasheet > SFH6286-4X001

SFH6286-4X001

更新时间： 2024-01-24 13:16:16

品牌	Logo	应用领域
威世 - VISHAY		输入元件输出元件光电
页数	文件大小	规格书
7页	199K
描述
OPTOISOLATOR 5.3KV TRANS 4SMD

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

SFH6286-4X001 技术参数

是否Rohs认证：	符合	生命周期：	Active
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8541.40.80.00	风险等级：	5.3
其他特性：	VDE APPROVED	Coll-Emtr Bkdn Voltage-Min：	55 V
配置：	SINGLE	标称电流传输比：	250%
最大暗电源：	200 nA	最大正向电流：	0.05 A
最大绝缘电压：	5300 V	JESD-609代码：	e3
元件数量：	1	最高工作温度：	100 °C
最低工作温度：	-55 °C	光电设备类型：	TRANSISTOR OUTPUT OPTOCOUPLER
端子面层：	Matte Tin (Sn)	Base Number Matches：	1

SFH6286-4X001 数据手册

Option Information

Vishay Semiconductors

www.vishay.com

Option Information

Optocoupler lead-bend configurations are available as

options. In addition, partial discharge testing as per

VDE / IEC is also available as an option.

The options are:

Option 1 VDE option

Option 6 400 mil (10.16 mm) lead spread DIP configuration

See the order information section in the data sheet to

determine if and which options are available to a specific

product. Contact the Vishay sales office for other option

configurations.

Option 7 Surface mount, gull wing DIP configuration with

standoff

Option 8 Surface mount, gull wing DIP configuration with

increased clearance

Option 9 Surface mount, gull wing DIP configuration

ORDERING OPTIONS

A specific option or combination of options can be ordered

by add the options definition field following the base part

number and CTR range (if applicable) as presented in the

following example:

Base Part Number

Options Definition

Prefix

CTR Ranges

Tape and

Reel Option

1 = 40 % to 80 %

Option 1 Optocouplers for safe electrical

Insulation per DIN VDE 0884

BRT

ILD

ILQ

SFH6

2 = 63 % to 125 %

3 = 100 % to 200 %

4 = 160 % to 320 %

5 = 250 % to 500 %

or 50 % to 150 %

6 = 100 % to 300 %

7 = 80 % to 160 %

8 = 130 % to 260 %

9 = 200 % to 400 %

Option 6 Optocouplers with 10.16 mm (0.4")

through hole lead spread

Option 7 Optocouplers with SMD lead form bend,

0.9 mm maximum standoff height

Option 8 Optocouplers with 10.16 mm (0.4") SMD

lead form bend

Option 9 Optocouplers with SMD lead form bend,

0.25 mm maximum standoff height

(1)

Option 1 may be combined with the other

lead forming options.

Option T may only be combined with

Options 7, 8, and 9

Examples:

CNY17F-2X017T

4N35-X016

SFH615-3X001

Note

⁽¹⁾Used on selected products, consult data sheet for details

VO615A-9X007T

18482

This field is always 4 characters long and commences with

the character X. In the case of surface mounted products in

tape and reel format, the tape and reel option character “T”

will follow this field.

The possible combinations for these fields ⁽¹⁾are:

X001, X006, X007, X008, X009, X001T ⁽²⁾, X007T, X008T,

X009T, X016, X017, X018, X019, X017T, X018T, X019T

Notes

(1)

Not all options are available for all product types.

The X001T option is only available on products that are available on the following SMD products SFH6106, SFH6156, SFH6186, SFH6206,

(2)

and SFH6286 series, e.g. SFH6106-3X001T .



OPTION 1

OPTOCOUPLERS FOR SAFE ELECTRICAL INSULATION PER DIN EN 60747-5-5 (VDE 0884) ⁽¹⁾

The optocoupler listed are suitable for safe electrical

insulation only within the safety maximum ratings.

Compliance with the safety maximum ratings must be

ensured by protective circuits.

It is recommended that tests with the insulation test voltage

(V_ISOL) should not be made, otherwise partial discharge may

occur impairing the insulation characteristics. Thus partial

discharges also may occur at the maximum permissible

operating insulation voltage.

The partial discharge measurement ensures that no partial

discharge occurs during operation at maximum permissible

operating insulation voltage (V_IORM). Permanent partial

discharge affects the insulating materials and can result in a

high voltage breakdown.

The insulation test per DIN EN 60747-5-5 (VDE 0884) is

carried out after all the other tests

Rev. 2.0, 24-Aug-15

Document Number: 83713

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

12 3 4 5 6 7

中文翻译

下载PDF

与SFH6286-4X001相关器件

型号	品牌	获取价格	描述	数据表
SFH6286-4X001T	VISHAY	获取价格	OPTOISOLATOR 5.3KV TRANS 4SMD
SFH6286T-3	VISHAY	获取价格	AC Input-Transistor Output Optocoupler, 1-Element, 5300V Isolation
SFH6286T-4	VISHAY	获取价格	AC Input-Transistor Output Optocoupler, 1-Element, 5300V Isolation
SFH628A	VISHAY	获取价格	Optocoupler, Phototransistor Output, AC Input, Low Input Current
SFH628A, SFH6286	VISHAY	获取价格	Optocoupler, Phototransistor Output, AC Input, Low Input Current
SFH628A-2	VISHAY	获取价格	Optocoupler, Phototransistor Output, AC Input, Low Input Current
SFH628A-2	ISOCOM	获取价格	LOW INPUT CURRENT PHOTOTRANSISTOR OPTICALLY COUPLED ISOLATORS
SFH628A-2	INFINEON	获取价格	Optocouplers
SFH628A-2-G	ISOCOM	获取价格	AC Input-Transistor Output Optocoupler, 1-Element, 5300V Isolation, ROHS COMPLIANT, PLASTI
SFH628A-2SM	ISOCOM	获取价格	AC Input-Transistor Output Optocoupler, 1-Element, 5300V Isolation, ROHS COMPLIANT, PLASTI

与SFH6286-4X001相关文章

MBRS340T3G手册解读：参数说明、产品特性及应用
2024-06-28

8
PMOS管背靠背连接：串联还是并联？
2024-06-28

7
高压电解电容的分类与选型策略
2024-06-28

8
数码管：基本概念、分类、技术发展及市场趋势
2024-06-27

14

产品中心

服务支持

精选活动

关于我们

帮助中心

SFH6286-4X001

SFH6286-4X001 技术参数

SFH6286-4X001 数据手册

与SFH6286-4X001相关器件

与SFH6286-4X001相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

SFH6286-4X001

SFH6286-4X001 技术参数

SFH6286-4X001 数据手册

与SFH6286-4X001相关器件

与SFH6286-4X001相关文章

您还可以找

您在本页遇到什么问题？