SFH615AA/AGB/AGR/ABM/ABL/AY/AB
VISHAY
Vishay Semiconductors
Optocoupler, High Reliability, 5300 VRMS
Features
• Low CTR Degradation
• Good CTR Linearity Depending on Forward Cur-
rent
• Isolation Test Voltage, 5300 VRMS
• High Collector-emitter Voltage, VCEO = 70 V
• Low Saturation Voltage
C
E
A
C
4
3
1
2
• Fast Switching Times
• Temperature Stable
i179060
• Low Coupling Capacitance
• End-Stackable, .100 " (2.54 mm) Spacing
• High Common-mode Interference Immunity
Order Information
(Unconnected Base)
Part
Remarks
SFH615AA
CTR 50 - 600 %, DIP-4
Agency Approvals
SFH615AB
CTR 80 - 260 %, DIP-4
• UL - File No. E52744 System Code H or J
SFH615ABL
SFH615ABM
SFH615AGB
SFH615AGR
SFH615AY
CTR 200 - 600 %, DIP-4
• DIN EN 60747-5-2(VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
CTR 200 - 400 %, DIP-4
CTR 100 - 600 %, DIP-4
CTR 100 - 300 %, DIP-4
CTR 50 - 150 %, DIP-4
Description
SFH615AA-X006
SFH615AA-X007
CTR 50 - 600 %, DIP-4 400 mil (option 6)
CTR 50 - 600 %, SMD-4 (option 7)
The SFH615XXX features a large assortment of cur-
rent transfer ratio, low coupling capacitance and high
isolation voltage. These couplers have a GaAs infra-
red emitting diode emitter, which is optically coupled
to a silicon planar phototransistor detector, and is
incorporated in a plastic DIP-4 package.
SFH615ABM-X006 CTR 200 - 400 %, DIP-4 400 mil (option 6)
SFH615ABM-X007 CTR 200 - 400 %, SMD-4 (option 7)
SFH615AGB-X006 CTR 100 - 600 %, DIP-4 400 mil (option 6)
SFH615AGB-X009 CTR 100 - 600 %, SMD-4 (option 9)
SFH615AGR-X006 CTR 100 - 300 %, DIP-4 400 mil (option 6)
SFH615AGR-X007 CTR 100 - 300 %, SMD-4 (option 7)
The coupling devices are designed for signal trans-
mission between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm lead
spacing.
SFH615AY-X006
SFH615AY-X008
SFH615AY-X009
CTR 50 - 150 %, DIP-4 400 mil (option 6)
CTR 50 - 150 %, SMD-4 (option 8)
CTR 50 - 150 %, SMD-4 (option 9)
Creepage and clearance distances of > 8 mm are
achieved with option 6. This version complies with
60950 (DIN VDE 0805) for reinforced insulation up to
operation voltage of 400 VRMS or DC.
For additional information on the available options refer to
Option Information.
Document Number 83672
Rev. 1.4, 19-Apr-04
www.vishay.com
1