SFH615AA/AGB/AGR/ABM/ABL/AY/AB
Vishay Semiconductors
Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS
FEATURES
• Low CTR degradation
• Good CTR linearity depending on forward
current
• Isolation test voltage, 5300 VRMS
C
E
• High collector emitter voltage, VCEO = 70 V
• Low saturation voltage
A
C
4
3
1
2
• Fast switching times
i179060
• Temperature stable
DESCRIPTION
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
The SFH615XXX features a large assortment of current
transfer ratio, low coupling capacitance and high isolation
voltage. These couplers have a GaAs infrared emitting diode
emitter, which is optically coupled to a silicon planar
phototransistor detector, and is incorporated in a plastic
DIP-4 package.
• High common mode interference immunity (unconnected
base)
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and
WEEE 2002/96/EC
The coupling devices are designed for signal transmission
between two electrically separated circuits.
AGENCY APPROVALS
• UL1577, file no. E52744 system code H or J, double
protection
The couplers are end-stackable with 2.54 mm lead spacing.
Creepage and clearance distances of > 8 mm are achieved
with option 6. This version complies with 60950 (DIN VDE
0805) for reinforced insulation up to operation voltage of 400
VRMS or DC.
• DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending
available with option 1
• BSI IEC 60950; IEC 60065
ORDER INFORMATION
PART
REMARKS
SFH615AA
CTR 50 to 600 %, DIP-4
SFH615AB
CTR 80 to 260 %, DIP-4
SFH615ABL
CTR 200 to 600 %, DIP-4
SFH615ABM
CTR 200 to 400 %, DIP-4
SFH615AGB
CTR 100 to 600 %, DIP-4
SFH615AGR
CTR 100 to 300 %, DIP-4
SFH615AY
CTR 50 to 150 %, DIP-4
SFH615AA-X006
SFH615AA-X007
SFH615ABM-X006
SFH615ABM-X007
SFH615AGB-X006
SFH615AGB-X009
SFH615AGR-X006
SFH615AGR-X007
SFH615AY-X006
SFH615AY-X008
SFH615AY-X009
CTR 50 to 600 %, DIP-4 400 mil (option 6)
CTR 50 to 600 %, SMD-4 (option 7)
CTR 200 to 400 %, DIP-4 400 mil (option 6)
CTR 200 to 400 %, SMD-4 (option 7)
CTR 100 to 600 %, DIP-4 400 mil (option 6)
CTR 100 to 600 %, SMD-4 (option 9)
CTR 100 to 300 %, DIP-4 400 mil (option 6)
CTR 100 to 300 %, SMD-4 (option 7)
CTR 50 to 150 %, DIP-4 400 mil (option 6)
CTR 50 to 150 %,SMD-4 (option 8)
CTR 50 to 150 %,SMD-4 (option 9)
Note
For additional information on the available options refer to option information.
Document Number: 83672
Rev. 1.6, 10-Jan-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com
1