Document 349-1
SMT Power Inductor - SER2000 Series
• Designed for high current power supply applications
• Flat wire windings provide exceptionally low DCR
• Isat ratings as high as 100 A
Designer’s Kit C374 contains 2 each of nine part
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Ambient temperature –40°C to +85°C with Irms current, +85°C
to +125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C
/ 85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Only pure water or alcohol recommended
1
Recommended Land Pattern
0.290
7,37
0.755 ±0.02
19,18 ±0,51
2
3
0.160
4,06
3
Caution:
0.210
5,33
Terminal 3 is provided for mounting stability
only. This terminal is connected to the
winding of the inductor and must not be
connected to ground or any circuitry.
SER20xx-xxx
Coilcraft
XXXX
0.365 ±0.02
9,27 ±0,51
0.736 ±0.034
18,70 ±0,85
0.470
11,94
C
L
0.015
0,38
0.185
4,70
1
2
0.100 ±0.003
2,54 ±0,76
0.311 ±0.015
7,90 ±0,38
0.150
3,81
0.150
3,81
typ
0.260
Maximum
height
6,60
Weight
SER2009
SER2010
SER2011
SER2012
SER2013
SER2014
0.34 / 8,64
0.37 / 9,40
0.42 / 10,67
0.47 / 11,94
0.51 / 12,95
0.55 / 13,97
6.65 – 6.89 g
7.46 – 7.90 g
8.63 – 9.08 g
9.92 – 10.3 g
10.8 – 11.4 g
11.7 – 12.4 g
Height
(See table)
0.004/0,102
0.130
3,30
*
inches
mm
0.125
3,18
0.515±0.015
13,08 ±0,37
0.100
2,54
Dimensions are in
Width of flat area on winding
*
Packaging
SER2009 200 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 4 mm pocket spacing, 9.25 pocket depth
SER2010 200 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 4 mm pocket spacing, 10.5 pocket depth
SER2011 170 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 4 mm pocket spacing, 11.6 pocket depth
SER2012 150 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 4 mm pocket spacing, 13.0 pocket depth
SER2013 150 per 13″ reel; Plastic tape: 44 mm wide, 0.5 mm thick, 4 mm pocket spacing, 14.0 pocket depth
SER2014 125 per 13″ reel; Plastic tape: 44 mm wide, 0.5 mm thick, 4 mm pocket spacing, 15.0 pocket depth
Specifications subject to change without notice.
Please check our website for latest information. Document 349-1 Revised 10/20/08
© Coilcraft, Inc. 2009