Document 349-1
Shielded Power Inductor
–
SER2000
• Designed for high current power supply applications
• Flat wire windings provide exceptionally low DCR
• Isat ratings as high as 100 A
Designer’s Kit C374 contains 2 each of nine parts.
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
1
Recommended Land Pattern
0.ꢀ90
7,37
0.755 0.0ꢀ
19,18 0,51
2
3
0.160
ꢁ,06
3
0.ꢀ10
5,33
Caution:
SERꢀ0xx-xxxL
XXXX Y
Terminal 3 is provided for mounting
stability only. This terminal is connected
to the winding of the inductor and must
not be connected to ground or any
circuitry.
0.365 0.0ꢀ
9,ꢀ7 0,51
0.736 0.03ꢁ
18,70 0,86
0.ꢁ70
11,9ꢁ
C
L
C
L
0.ꢁ1ꢀ 0.03ꢁ
10,ꢁ6 0,86
0.015
0,38
0.185
ꢁ,70
Internal code
0.100 0.003
1
ꢀ
0.311 0.015
7,90 0,38
0.150
3,81
0.150
3,81
typ
ꢀ,5ꢁ 0,076
0.ꢀ60
6,60
Maximum
height
Weight
SERꢀ009
SERꢀ010
SERꢀ011
SERꢀ01ꢀ
SERꢀ013
SERꢀ01ꢁ
0.3ꢁ / 8,6ꢁ
0.37 / 9,ꢁ0
0.ꢁꢀ / 10,67
0.ꢁ7 / 11,9ꢁ
0.51 / 1ꢀ,95
0.55 / 13,97
6.65 – 6.89 g
7.ꢁ6 – 7.90 g
8.63 – 9.08 g
9.9ꢀ – 10.3 g
10.8 – 11.ꢁ g
11.7 – 1ꢀ.ꢁ g
Height
(See table)
0.00ꢁ/0,10ꢀ
0.130
3,30
*
0.1ꢀ5
3,18
0.515 0.015
13,08 0,37
0.100
ꢀ,5ꢁ
Width of flat area on winding
*
inches
mm
Dimensions are in
Packaging
SER2009 200 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 9.25 pocket depth
SER2010 200 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 10.5 pocket depth
SER2011 170 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 11.6 pocket depth
SER2012 150 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 13.0 pocket depth
SER2013 150 per 13″ reel; Plastic tape: 44 mm wide, 0.5 mm thick, 32 mm pocket spacing, 14.0 pocket depth
SER2014 125 per 13″ reel; Plastic tape: 44 mm wide, 0.5 mm thick, 32 mm pocket spacing, 15.0 pocket depth
Document 349-1 Revised 09/05/12
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.