PF926-02
SED1565 Series
SED1565 Series
Dot Matrix LCD Driver
SSC5000Series
■ DESCRIPTION
The SED1565 Series is a series of single-chip dot matrix liquid crystal display drivers that can be connected directly
to a microprocessor bus. 8-bit parallel or serial display data sent from the microprocessor is stored in the internal
display data RAM and the chip generates a liquid crystal drive signal independent of the microprocessor. Because
the chips in the SED1565 Series contain 65 × 132 bits of display data RAM and there is a 1-to-1 correspondence
between the liquid crystal panel pixels and the internal RAM bits, these chips enable displays with a high degree
of freedom.
The SED1565 Series chips contain 65 common output circuits and 132 segment output circuits, so that a single
chip can drive a 65 × 132 dot display (capable of displaying 8 columns × 4 rows of a 16 × 16 dot kanji font). The
SED1567 Series chips contain 33 common output circuits and 132 segment output circuits, so that a single chip
can drive 33 × 132 dot display (capable of displaying 8 columns × 2 rows of 16 × 16 dot kanji fonts). Moreover, the
capacity of the display can be extended through the use of master/slave structures between chips.
The chips are able to minimize power consumption because no external operating clock is necessary for the display
data RAM read/write operation. Furthermore, because each chip is equipped internally with a low-power liquid
crystal driver power supply, resistors for liquid crystal driver power voltage adjustment and a display clock CR
oscillator circuit, the SED1565 Series chips can be used to create the lowest power display system with the fewest
components for high-performance portable devices.
■ FEATURES
■ Direct display of RAM data through the display
data RAM.
Display data Read/Write, display ON/OFF, Normal/
Reverse display mode, page address set, display
start line set, column address set, status read,
display all points ON/OFF, LCD bias set, electronic
volume, read/modify/write, segmentdriverdirection
select, power saver, static indicator, common
output status select, V5 voltage regulation internal
resistor ratio set.
RAM bit data: “1” Non-illuminated
“0” Illuminated
(during normal display)
■ RAM capacity
65 × 132 = 8580 bits
■ Display driver circuits
SED1565 : 65 common output and 132 segment
■ Static drive circuit equipped internally for indicators.
(1 system, with variable flashing speed.)
■ Low-power liquid crystal display power supply
circuit equipped internally.
**
*
outputs
SED1566 : 49 common output and 132 segment
**
*
outputs
SED1567 : 33 common outputs and 132
Booster circuit (with Boost ratios of Double/Triple/
Quad, where the step-up voltage reference power
supply can be input externally)
High-accuracy voltage adjustment circuit (Thermal
gradient –0.05%/°C or –0.2%/°C or external input)
V5 voltage regulator resistors equipped internally,
V1 to V4 voltage divider resistors equipped
internally, electronic volume function equipped
internally, voltage follower.
**
*
segment outputs
SED1568 : 55 common outputs and 132
**
*
segment outputs
SED1569 : 53 common outputs and 132
**
*
segment outputs
■ High-speed 8-bit MPU interface (The chip can be
connected directly to the both the 80×86 series
MPUs and the 68000 series MPUs)
/Serial interfaces are supported.
■ CR oscillator circuit equipped internally (external
clock can also be input)
■ Abundant command functions
1