SE8803
Dual-Output Low Quiescent Current LDO
General Description
Features
The SE8803 is a regulator with very low dropout
and dual-output. It specifically designed for today’s
electricity meter applications.
Output 1
Output voltage of 5.0V (Typ.)
Low quiescent Current
The SE8803 has two voltage inputs and two
voltage outputs. Output1 has two distinct
requirements for the power supplies for the electricity
meters. The first requirement is low power
consumption. The second is low noise. Output1
uses a very unique design to achieve very low power
consumption while providing a very low noise power
output for electricity meter applications.
Over-current/Over-temperature Protection.
Minimum external components.
Output voltage tolerances of ±2%
ESD rating is 2KV (Per MIL-STD-883D)
Output 2
Output voltage of 11.6V (Typ.)
Output current up to 150mA (Typ.)
Current limiting Over thermal Protection.
Minimum external components.
Output voltage tolerances of ±2%
Input Voltage up to 30V
The second output is capable of delivering
150mA output current at a very low dropout voltage of
0.82V (Typical). The high precision output at 2%
ensures that the accurate power supply requirement
is met with enough margins in many tough
applications.
Operating Junction Temperature Range
-40 to +125°C
Both of Outputs also provides Over Current
Protection (OCP) and Over Temperature Protection
(OTP), these features will ensure a safe operating
environment for electricity meter applications.
ESD rating is 2KV (Per MIL-STD-883D)
Applications
Electricity meter.
The SE8803 is available in SOP and PSOP8
package.
Networking Equipments where low noise and
low power consumption is required.
Pin Configuration
Rev1.0
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., • www.seawardinc.com.cn • Page 1
9/4/2012