3-Pin Microprocessor Reset Monitor
(Preliminary)
SE810
Description
Features
The SE810 is
a
cost-effective system
¾
Precision VCC Monitor for 2.8V, 3.0V, 3.3V, and
5.0V Supplies
supervisor Integrated Circuit (IC) designed to
monitor VCC in digital and mixed signal systems
and provide a warning signal when the system
power supply is out of working range, and a reset
signal to the host processor when necessary. No
external components are required.
¾
¾
¾
¾
¾
¾
¾
¾
150mSec typical RESET Output Delay.
Low 7μA Supply Current typical.
VCC Transient Immunity
Small SOT-23 Package and TO-92 Package
No External Components
The reset output is driven active within 20μsec
of VCC falling through the reset voltage threshold.
Reset is maintained active for a 150mSec(typ) after
VCC rises above the reset threshold. The SE810
has an active-high RESET output.
ESD rating is 7KV(HBM).
Wide Operating Temperature: -40°C to 125°C
100% Lead (Pb)-Free
The SE810 is characterized for operation from
-40oC to 125oC, junction temperature. The SE810
is optimized to reject fast transient glitches on the
VCC line. Low supply current of 7μA (VCC=3.3V)
makes these devices suitable for battery powered
applications. The output voltages range from 1.7V
to 4.5V in 100mV increments. Standard voltage
versions are 2.30, 2.63, 2.93, 3.08, 4.0, 4.38, and
4.63V.
Application
¾
¾
¾
¾
Computers
Embedded systems
Battery powered equipment
Critical µP power supply monitoring
Pin Configuration
Application Diagram
Vcc
C=0. 1uF
Vcc
Vcc
PROCESSOR
SE810
RESET
INPUT
RESET
GND
GND
Revision 7/28/2009
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., 2007. • www.seawardinc.com.cn
1