DATA SHEET
SE5007T: 5 GHz Front End Module with Power Detector
Applications
Product Description
The SE5007T is a 5GHz front end module offering
high linear power for wireless LAN applications. It
incorporates a power detector for control of the output
power.
.
.
5 GHz WLAN (IEEE802.11a/g/n)
Access Points, PCMCIA, PC cards
Features
The SE5007T offers a high level of integration for a
simplified design, providing quicker time to market
and higher application board production yield. The
device integrates the input match, inter-stage match,
a temperature compensated, load insensitive power
detector with 20dB of dynamic range, a 3.8GHz notch
filter, a T/R switch and LNA.
.
5GHz Front End Module with PA, LNA and T/R
Switch
.
.
Integrated power amplifier enable pin (VEN)
Buffered, temperature compensated power
detector
.
.
.
.
High and Low-Linearity mode
3% EVM, @17dBm, 64 QAM, 54 Mbps
30 dB Typical Gain
Lead Free and RoHS compliant, halogen free
package
For wireless LAN applications, the device meets the
requirements
of
IEEE802.11a
and
delivers
approximately 17dBm of linear output power. It also
features a low linearity mode control to reduce current
consumption at low power modes.
.
16 pin 3 mm x 3 mm x 0.6 mm QFN, MSL1
The SE5007T integrates the reference voltage
generator, allowing for a true 1.8V CMOS compatible
digital EN (enable) function to turn the power amplifier
on and off.
Ordering Information
Part Number
Package
Remark
SE5007T
SE5007T-R
SE5007T-EK1
16 Pin QFN
16 Pin QFN
Evaluation Kit
Samples
Tape and Reel
Standard
Functional Block Diagram
VCC1,2
DET
H/L Lin
C0
C1
Bias, Enable, Detector Circuits
EN
Match
Match &
Filter
TXIN
ANT
RX
Figure 1: Functional Block Diagram
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00383 . Rev 2.0 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012
1 of 11