TOTAL POWER INT'L
600W Single Output Power Supply
SE-600 series
Features :
High power density 4.9w/in3
AC input active surge current limiting
AC input range selected by switch
Protections:Short circuit/Over load/Over voltage/Over temperature
Forced air cooling by built-in DC fan
Built-in remote sense function
UL approved
Low cost
2 years warranty
SPECIFICATION
MODEL
SE-600-5
SE-600-12
SE-600-15
SE-600-24
SE-600-27
SE-600-48
DC VOLTAGE
5V
12V
15V
24V
27V
48V
RATED CURRENT
CURRENT RANGE
RATED POWER
100A
50A
40A
25A
22.2A
12.5A
0 ~ 100A
500W
0 ~ 50A
600W
0 ~ 40A
600W
0 ~ 25A
600W
0 ~ 22.2A
599.4W
150mVp-p
24 ~ 30V
1.0%
0 ~ 12.5A
600W
150mVp-p
4.75 ~ 5.5V
2.0%
RIPPLE & NOISE (max.) Note.2
VOLTAGE ADJ. RANGE
150mVp-p
10 ~ 13.5V
1.0%
150mVp-p
13.5 ~ 16.5V
1.0%
150mVp-p
22 ~ 26.4V
1.0%
200mVp-p
43 ~ 56V
1.0%
OUTPUT
VOLTAGE TOLERANCE Note.3
LINE REGULATION
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
LOAD REGULATION
2.0%
0.5%
0.5%
0.5%
0.5%
0.5%
SETUP, RISE, HOLD TIME
1000ms, 50ms, 16ms/230VAC
1000ms, 50ms, 14ms/115VAC at full load
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY (Typ.)
AC CURRENT
90 ~ 132VAC / 180 ~ 264VAC selected by switch
47~63Hz
254 ~ 370VDC
78%
83%
84%
87%
87%
88%
INPUT
12A/115VAC
30A/115VAC
<2.0mA / 240VAC
7.5A/230VAC
50A/230VAC
INRUSH CURRENT (max.)
LEAKAGE CURRENT
105 ~ 125% rated output power
Protection type : Shut down o/p voltage, re-power on to recover
5.75 ~ 6.3V 13.8 ~ 16.2V 18 ~ 21V
Protection type : Shut down o/p voltage, re-power on to recover
85 (TSW1) Detect on heatsink of power transistor
OVER LOAD
27.6 ~ 32.4V
31 ~ 36.5V
57.6 ~ 67.2V
PROTECTION OVER VOLTAGE
5
OVER TEMPERATURE
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
-20 ~ +60 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
-40 ~ +85 , 10 ~ 95% RH
ENVIRONMENT
0.05%/ (0 ~ 50
)
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL60950 Approved
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
SAFETY &
EMC
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE
MTBF
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
197K hrs min. MIL-HDBK-217F (25
247*127*63.5mm (L*W*H)
)
OTHERS
NOTE
DIMENSION
2Kg; 6pcs/12Kg/0.76CUFT
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.