5秒后页面跳转
SDM300PS24-F PDF预览

SDM300PS24-F

更新时间: 2024-01-14 03:46:52
品牌 Logo 应用领域
XPPOWER /
页数 文件大小 规格书
4页 516K
描述
Medical Approvals

SDM300PS24-F 数据手册

 浏览型号SDM300PS24-F的Datasheet PDF文件第2页浏览型号SDM300PS24-F的Datasheet PDF文件第3页浏览型号SDM300PS24-F的Datasheet PDF文件第4页 
300 Watts  
xppower.com  
SDM Series  
Medical Approvals  
3.2” x 5” Footprint  
Fits 1U Applications  
High Efficiency  
Up to 600 W Peak Power  
Single & Dual Outputs  
3 Year Warranty  
Specification  
Input  
General  
Efficiency  
• Single output models: typically 86%  
Dual output models: typically 82%  
• 4000 VAC Input to Output  
1500 VAC Input to Ground  
250 VDC Output to Ground  
Input Voltage  
Input Frequency  
Input Current  
Inrush Current  
• 90-264 VAC  
• 47-63 Hz  
• 5.0 A at 90 VAC, 2 A at 230 VAC  
• Max 70 A at 230 VAC, 35 A at 115 VAC,  
cold start 25 °C  
Isolation  
Switching Frequency  
• 40-70 kHz PFC variable,  
55 kHz - 75 kHz PWM fixed  
Power Factor  
• >0.9  
Earth Leakage Current • <250 µA at 264 VAC, 60 Hz  
Input Protection  
3
Power Density  
Signals  
• 12.5 W/in  
• T5 A / 350 V internal in line fuse  
• Power Good goes Hi 100-500 ms after  
output is in regulation and goes Low at  
least 0.6 ms before loss of regulation  
Output  
MTBF  
• 116 kHrs to MIL-HDBK-217F at 25 °C, GB  
Output Voltage  
• See table  
Environmental  
Operating Temperature • -10 °C to +70 °C, derate at 2.5%/ °C from  
Output Voltage Trim  
5% on V1 (V2 of dual output models will  
track by same % of adjustment)  
1%  
+50 °C to +70 °C  
Initial Set Accuracy  
Minimum Load  
Storage Temperature • -20 °C to +85 °C  
• 10% on both outputs of dual  
output models  
• 1.1 s max at 120 VAC  
• 100 ms typical  
• 16 ms min at 80% of full load, 120 VAC  
Operating Humidity  
Storage Humidity  
Cooling  
• 5-90%, non-condensing  
• 5-95%, non-condensing  
• ‘-F’, ‘-E’ & ‘-K’ versions have built-in fan,  
others require 15 CFM to meet forced air  
ratings  
• 3000 m  
• 30 g, 11ms half sine, 6 axes  
• 2 g, 10-200 Hz, 3 axes  
Start Up Delay  
Start Up Rise Time  
Hold Up Time  
Line Regulation  
Load Regulation  
0.5%  
Operating Altitude  
Shock  
Vibration  
1% 1-100% load for single outputs  
3% V1, 7% V2 for dual output models  
Over/Undershoot  
• 5% max  
Transient Response  
• 5% max deviation, recovery to within  
1% in 2.5 ms for a 50% load change  
• 1% pk-pk (see note 1)  
EMC & Safety  
Emissions  
Harmonic Currents  
• EN55011 Level B conducted & radiated  
• EN61000-3-2 class A  
Ripple & Noise  
Overvoltage Protection • 110-130% Vnom on output V1,  
EN61000-3-2 class C for loads ≥40%  
• EN61000-3-3  
recycle input to reset  
• Measured internally with auto recovery  
Voltage Flicker  
ESD Immunity  
Radiated Immunity  
EFT/Burst  
Overtemperature  
Protection  
• EN61000-4-2, level 3 Perf Criteria A  
• EN61000-4-3, 3 V/m Perf Criteria A  
• EN61000-4-4, level 2 Perf Criteria A  
• EN61000-4-5, installation class 3,  
Perf Criteria A  
Overload Protection  
• 110-140%  
Short Circuit Protection • Trip & restart (hiccup mode), auto recovery  
Surge  
Remote On/Off  
Fan Supply  
• Requires a low signal to inhibit output  
• 12 VDC, 300 mA, not available on  
‘-F’, ‘-E’ or ‘-K’ versions with built-in fan  
Conducted Immunity  
Dips & Interruptions  
• EN61000-4-6, 3V Perf Criteria A  
• EN61000-4-11, 30% 500 ms, 60%  
100 ms, 100% 10 ms, 100% 5000 ms,  
Perf Criteria A, A, A, B at 230 VAC and  
100 VAC with reduced load  
Safety Approvals  
• ANSI/AMMI ES60601-1, CSA C22.2  
No. 60601-1, EN60601-1, All 3rd Edition  

与SDM300PS24-F相关器件

型号 品牌 获取价格 描述 数据表
SDM300PS36-F XPPOWER

获取价格

Medical Approvals
SDM300PS48-F XPPOWER

获取价格

Medical Approvals
SDM30-12S12 MEANWELL

获取价格

30W DC-DC Single Output
SDM30-12S15 MEANWELL

获取价格

30W DC-DC Single Output
SDM30-12S3 MEANWELL

获取价格

30W DC-DC Single Output
SDM30-12S5 MEANWELL

获取价格

30W DC-DC Single Output
SDM30-24S12 MEANWELL

获取价格

30W DC-DC Single Output
SDM30-24S15 MEANWELL

获取价格

30W DC-DC Single Output
SDM30-24S3 MEANWELL

获取价格

30W DC-DC Single Output
SDM30-24S5 MEANWELL

获取价格

30W DC-DC Single Output