SD6251
2.5A 55
5V,
0KHz High Efficiency Low Ripple
Synchronous Step-Up Converter
Description
Features
The SD6251 is a high efficiency, fixed frequency
550KHz, current mode PWM boost DC/DC converter
which could operate battery such as input voltage
down to 2.5V. The converter output voltage can be
adjusted to a maximum of 5.25V by an external
resistor divider. Besides the converter includes a
0.08Ω N-channel MOSFET switch and 0.12Ω
P-channel synchronous rectifier. So no external
Schottky diode is required and could get better
efficiency near 93%.
High Efficiency up to 93%
Low RDS(ON) Integrated Power MOSFET
NMOS 80mΩ / PMOS120mΩ
Wide Input Voltage Range: 2.5V to 5.5V
Fixed 550KHz Switching Frequency
Low-Power Mode for Light Load Conditions
±2.0% Voltage Reference Accuracy
PMOS Current Limit for Short Circuit Protection
Low Quiescent Current
Output Ripple under 200mV. (Scope Full
Bandwidth)
Fast Transient Response
The converter is based on a fixed frequency, current
mode, pulse-width-modulation PWM controller that
goes automatically into PSM mode at light load.
Built-In Soft Start Function
Over-Temperature Protection with Auto Recovery
Output Overvoltage Protection
Space-Saving SOT-23-6 Package
When converter operation into discontinuous mode,
the internal anti-ringing switch will reduce
interference and radiated electromagnetic energy.
Applications
The SD6251 is available in a space-saving SOT-23-6
package for portable application.
Portable Power Bank
Wireless Equipment
Handheld Instrument
GPS Receiver
Pin Assignments
Ordering Information
SD6251□□□ □
Package (SOT-23-6)
R: Tape/Reel
VIN
OUT EN
G: Green
6
5
4
3
(Marking)
1
2
Package Type
D6: SOT-23-6 and marking
LX GND FB
Figure 1. Pin Assignment of SD6251
Ver 1.0 Oct 2012
http://www.sdw-tw.com
1