SD25-1R2-R

更新时间： 2024-11-12 06:10:39

品牌	Logo	应用领域
库柏 - COOPER		稳压器开关电感器固定电感器
页数	文件大小	规格书
4页	373K
描述
Switching Regulators

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

SD25-1R2-R 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Transferred	包装说明：	2020
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8504.50.80.00	风险等级：	5.13
Is Samacsys：	N	大小写代码：	2020
构造：	Shielded	型芯材料：	FERRITE
直流电阻：	0.024 Ω	标称电感 (L)：	1.2 µH
电感器应用：	POWER INDUCTOR	电感器类型：	GENERAL PURPOSE INDUCTOR
JESD-609代码：	e3	功能数量：	1
端子数量：	2	最高工作温度：	85 °C
最低工作温度：	-40 °C	封装高度：	2.5 mm
封装长度：	5.2 mm	封装形式：	SMT
封装宽度：	5.2 mm	包装方法：	TR, 13 Inch
最大额定电流：	3.81 A	系列：	SD
形状/尺寸说明：	RECTANGULAR PACKAGE	屏蔽：	YES
表面贴装：	YES	端子面层：	Matte Tin (Sn) - with Nickel (Ni) barrier
端子位置：	DUAL ENDED	端子形状：	WRAPAROUND
容差：	20%	Base Number Matches：	1

SD25-1R2-R 数据手册

Inductor Selection for Switching Regulators

Introduction/Basic Operation

In switching regulator applications the inductor is used as an energy

storage device. When the semiconductor switch is on the current in the

inductor ramps up and energy is stored. When the switch turns off energy

is released into the load. The amount of energy stored is calculated by the

formula Energy = ½L.I² (Joules), where:

•L is the inductance in Henrys

•I is the peak value of inductor current

The amount by which the current changes during a switching cycle is

known as the ripple current. Ripple current is defined as Vl = L.di/dt:

•V is the voltage across the inductor

•di is the ripple current

•dt is the duration for which the voltage is applied

I load

I inductor

V out

ESR

Figure 1:

Buck Inductor

Inductor current is made up of AC and DC components (Figure 1). The AC

component is high frequency and will flow through the output capacitor

because it has a low HF impedance. A ripple voltage is produced due to

the capacitor ‘equivalent series resistance’ (ESR) that will appear at the

output of the switching regulator. This ripple voltage needs to be

sufficiently low as not to effect the operation of the circuit the regulator is

supplying, normally in the order of 10-500mV

pk-pk

The following parameters need to be defined or calculated to select an

inductor:

•Maximum input voltage

Selecting the correct ripple current impacts the size of the inductor and

output capacitor. The capacitor needs to have a sufficiently high ripple

current rating or it will overheat and dry out. To achieve a good

compromise between inductor and capacitor size a ripple current value of

10-30% of maximum inductor current should be chosen. The current in

the inductor will be continuous for output currents greater that 5-15% of

full load.

•Output voltage

•Switching frequency

•Maximum ripple current

SD3814

•Duty cycle

12 3 4

中文翻译

下载PDF

与SD25-1R2-R相关器件

型号	品牌	获取价格	描述	数据表
SD25-1R5	COOPER	获取价格	General Purpose Inductor, 1.5uH, 20%, 1 Element, Ferrite-Core, SMD, CHIP
SD25-1R5-R	COOPER	获取价格	Switching Regulators
SD25-2140R9UUA1	KYOCERA AVX	获取价格
SD25-2155R9UUA1	KYOCERA AVX	获取价格
SD25-220	ETC	获取价格	High Power Density, Low Profile, Shielded Inductors
SD25-220-R	COOPER	获取价格	Switching Regulators
SD25-221	COOPER	获取价格	General Purpose Inductor, 220uH, 20%, 1 Element, Ferrite-Core, SMD, CHIP
SD25-221-R	COOPER	获取价格	Switching Regulators
SD25-2655R9UUA1	KYOCERA AVX	获取价格
SD25-2R2	COOPER	获取价格	General Purpose Inductor, 2.2uH, 20%, 1 Element, Ferrite-Core, SMD, CHIP

与SD25-1R2-R相关文章

国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

23
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

8
AMD宣布全球裁员约1000人，调整战略聚焦增长
2024-11-14

9
英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

32

产品中心

服务支持

精选活动

关于我们

帮助中心

SD25-1R2-R

SD25-1R2-R 技术参数

SD25-1R2-R 数据手册

与SD25-1R2-R相关器件

与SD25-1R2-R相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

SD25-1R2-R

SD25-1R2-R 技术参数

SD25-1R2-R 数据手册

与SD25-1R2-R相关器件

与SD25-1R2-R相关文章

您还可以找

您在本页遇到什么问题？