SCC Series
Silicon pressure sensors
0 psi to 5 psi and 0 psi to 300 psi
DESCRIPTION
The SCC Series sensors offer an extremely low cost sensor
element with a temperature stable output when driven with a
constant current source. These integrated circuit sensors
were designed for extremely cost sensitive applications where
precise accuracy over a wide temperature range is not
required. This series is intended for use with non-corrosive,
non-ionic working fluids such as air, and dry gases.
Absolute devices have an internal vacuum reference and an
output voltage proportional to applied pressure. The
differential devices allow application of pressure to either side
of the diaphragm and devices are thereby available to
measure both differential and gage pressures.
This product is packaged either in standard low cost chip
carrier “button” package or a DIP package. Both packages
are designed for applications where the sensing element is to
be integral to the OEM equipment. These packages can be o-
ring sealed, epoxied, and/or clamped onto a pressure fitting.
A closed bridge four pin SIP configuration is provided for
electrical connection to the button package. The DIP package
offers a 5-pin open bridge configuration.
FEATURES
TYPICAL APPLICATIONS
• Low cost sensor element
• Pneumatic controls
• Automotive diagnostics
• Medical equipment
• Dental equipment
• Internal temperature compensation
• Differential or gage pressures
• Environmental controls
ORDERING INFORMATION
Part Number for Ordering
Pressure Range
Sensor in
Button Package
SCC05D
SCC015D
SCC30D
SCC100D
SCC15A
Sensor in
Sensor in
Nipple Package
SCC05DP1
SCC015DP1
SCC30DP1
–
Sensor in
DIP Package
“N” Package
SCC05DN
SCC015DN
SCC30DN
SCC100DN
SCC15AN
SCC30AN
SCC100AN
–
0 psid to 5 psid or psig
0 psid to 15 psid or psig
0 psid to 30 psid or psig
0 psig to 100 psig
0 psia to 15 psia
SCC05GD2, SCC05DD4
SCC15GD2, SCC15DD4
SCC30GD2, SCC30DD4
SCC100GD2, SCC100DD4
SCC15AD2
SCC15AP1
SCC30AP1
–
0 psia to 30 psia
SCC30A
SCC30AD2
0 psia to 100 psia
SCC100A
–
SCC100AD2
0 psia to 300 psi
–
–
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
WARNING
PERSONAL INJURY
• Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.