SC121
Low Voltage Synchronous
Boost Regulator
POWER MANAGEMENT
Features
Description
Input voltage — 0.7V to 4.5V
The SC121 is a high efficiency, low noise, synchronous
step-up DC-DC converter that provides boosted voltage
levels in low-voltage handheld applications. The wide
input voltage range allows use in systems with single
NiMH or alkaline battery cells as well as in systems with
higher voltage battery supplies. It features an internal
1.2A switch and synchronous rectifier to achieve up to
94% efficiency and to eliminate the need for an external
Schottky diode. The output voltage can be set to 3.3V
with internal feedback, or to any voltage within the speci-
fied range using a standard resistor divider.
Minimum start-up voltage — 0.85V
Output voltage — fixed at 3.3V; adjustable from 1.8V
to 5.0V
Peak input current limit — 1.2A
Output current at 3.3 VOUT — 80mA with VIN = 1.0V,
190mA with VIN = 1.5V
Forced PWM operation at all loads
Efficiency up to 94%
Internal synchronous rectifier
No forward conduction path during shutdown
Switching frequency — 1.2MHz
Soft-start startup current limiting
Shutdown current — 0.1μA (typ)
Ultra-thin 1.5 × 2.0 × 0.6 (mm) MLPD-UT-6 package
Lead-free and halogen-free
The SC121 operates exclusively in Pulse Width Modulation
(PWM) mode for low ripple and fixed-frequency switching.
Output disconnect capability is included to reduce leakage
current, improve efficiency, and eliminate external com-
ponents sometimes needed to disconnect the load from
the supply during shutdown.
WEEE and RoHS compliant
Applications
Low quiescent current is maintained with a high 1.2MHz
operating frequency. Small external components and the
space saving MLPD-UT-6, 1.5×2.0×0.6 (mm) package
make this device an excellent choice for small handheld
applications that require the longest possible battery life.
MP3 players
Smart phones and cellular phones
Palmtop computers and handheld instruments
PCMCIA cards and memory cards
Digital cordless phones
Personal medical products
Wireless VoIP phones
Small motors
Typical Application Circuit
L1
IN
LX
Single
Cell
OUT
3.3V
EN
(1.2V)
FB
GND
CIN
COUT
SC121
April 13, 2010
1
© 2010 Semtech Corporation