SBP & SHB Series
Surface Mount Aluminum
Electrolytic Capacitors
(Bi-Polar Chip Type)
MERITEK
SBP SERIES 85oC, 2,000 Hours
SHB SERIES 105oC, 1,000 Hours
•
Bi-polar chip type, used in circuit whose polarity is sometimes
reversed
•
•
SBP SERIES 85oC max. operating temperature
SHB SERIES 105oC max. operating temperature
SPECIFICATIONS
ITEM
CHARACTERISTICS
Series
SBP
SHB
Operating Temperature Range
Rated Voltage
-40 to +85oC
4 to 50VDC
-40 to +105oC
4 to 50VDC
Capacitance Tolerance
Leakage Current
±±0ꢀ (M) at ±0oC, 1±0Hz
I<0.05CV or 10μA, whichever is greater (at ±0oC, after ± minutes.)
Where I: Leakage Current (μA), C: Nominal Capacitance (μF), V: Rated Voltage (VDC)
Rated voltage
SBP
SHB
4V
0.45
-
6.3V
0.3±
0.35
10V
0.±6
0.±6
16V
0.±4
0.±4
±5V
0.±±
0.±0
35V
0.±0
0.18
50V
0.±0
0.18
Dissipation Factor (Tan δ)
at ±0 oC ,1±0Hz
Max impedance ratio at 1±0Hz, ±0oC
Max impedance ratio at 1±0Hz, ±0oC
Low Temperature
Characteristics
Rated voltage
Z ratio at
4
7
6.3
4
10
3
16
±
±5
±
35
±
50
±
Rated voltage
Z ratio at
6.3
4
10
3
16
±
±5
±
35
50
±
±
o
–±5 to ±0 C
–±5 to ±0oC
Z ratio at
15
10
8
6
4
3
3
Z ratio at
10
8
6
4
3
3
–±5 to ±0oC
–±5 to ±0oC
Load Life
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to ±0oC after the rated
voltage applied with the following condition with its polarization reversed every ±50 hours.
SBP
SHB
Test time & temperature
Capacitance change
±,000 hours at 85 oC
1,000 hours at 105 oC
≤ ±±0ꢀ of the initial value
≤ ±30ꢀ of the initial value
DF(tan δ)
Leakage current
≤ ±00ꢀ of the initial specified value
≤ 300ꢀ of the initial specified value
≤ initial specified value
≤
initial specified value
The following specifications shall be satisfied when the capacitors are restored to ±0oC after exposing them
for 500 hours at 85oC (SBP) or 105 oC (SHB) without voltage applied.
The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at ±4 hours and not more
than 48 hours before the measurements.
SBP
SHB
Capacitance change
±15ꢀ of the initial value
±±5ꢀ of the initial value
DF(tan δ)
≤ 150ꢀ of the initial specified
value
≤ ±00ꢀ of the initial specified
value
Leakage current
≤ initial specified value
≤ initial specified value
Others
Satisfies characteristic W of KS C 64±1
SBP 16V 221
PART NUMBERING SYSTEM
M
D55
Meritek Series
Rated Voltage
CODE
4V
6.3V
10V
16V
±5V
35V
50V
Capacitance
CODE
μF
R1
0.1
R47
0.47
±R0
±
4R7
4.7
100
10
101
100
Capacitance tolerance (±0ꢀ)
Case size
Specifications are subject to change without notice.
rev.6a