Datasheet > SARS-SH-112HMD

SARS-SH-112HMD

更新时间： 2022-05-14 22:12:36

品牌	Logo	应用领域
三友 - SANYOU		/
页数	文件大小	规格书
3页	155K
描述
Automotive Relay

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

SARS-SH-112HMD 数据手册

version:V1.4

SANYOU RELAYS

Automotive Relay

SARS-Series

Relays for advanced technology

Features

● 35A switching capability.

● NO type and CO type are avaliable

● Satisfy RoHS and ELV

Contact Capacity

Model

SARS

Max. continuous current⁽¹⁾

Max. switching current

Max. switching voltage

35A

connect (NO):150A⁽²⁾, disconnect(NO):35A

see performance curve

Contact Data

Contact Current(A)

duty factor

Contact

Voltage

contact

material

endurance

（cycles）

test ambient

temperature

Load Type

1C﹑1A

OFF

resistive

150

1x10⁵

AgSnO ₂

off

23℃

lamp load

14VDC

AgSnO ₂

off

general

AgSnO ₂

Note: If the load condition is not in the table. Please contact SANYOU with load details to get more support

Characteristic Data

Contact material

contact voltage drop

Operate time

Silver alloy

200mv/at 10A (max)

10msec. Max.

(3)

10msec. Max.

Release time

100MΩ Min.(DC500V)

Initial insulation resistance

(4)

Between open contacts： AC500V， 50/60Hz 1min.

Between coil and contact： AC500V， 50/60Hz 1min.

10~25Hz 1.27mm double-amplitude

Initial dielectric strength

Vibration resistance⁽⁵⁾

Shock resistance

25~500Hz 98m/s

NO 20G/ NC 5G

1x10⁷

(at 10,800 ops./h)

Mechanical

Electrical

Endurance

see contact parameter table

Cover retentivity：（pull and press）≥200N

pull and press

mechanical behavior

）≥100N

Terminals retentivity：（

(6)

Terminals bending stiffness：（all directios）≥10N

-40℃～+125℃ (no condensation)

Approx.17.5 g

Ambient temperature

Unit weight

( 1）For the normally open contact，the measurement of the 100% rated voltage is applied to the coil

Note：

（2）surge current in lamp load，14VDC；

（3）Rated voltage step up to 0VDC，And measurement without coil suppression circuit；

（4）The leakage current is less than 1mA；

1/3

（5）When the excitation is excited,the opening time of the normally open contact is less than 1ms;when no excitation,the normally closed contact

time is less than 1ms,at the same time,the normally open contact can not be closed；

（6）Test point for the distance 2mm from the end foot,when the test force is removed,the lead foot should be less than 0.5mm ；

12 3

下载PDF

与SARS-SH-112HMD相关器件

型号	品牌	描述	获取价格	数据表
SARS-SH-112HMDC	SANYOU	Automotive Relay	获取价格
SARS-SH-124DMD	SANYOU	Automotive Relay	获取价格
SARS-SH-124DMDC	SANYOU	Automotive Relay	获取价格
SARS-SH-124HMD	SANYOU	Automotive Relay	获取价格
SARS-SH-124HMDC	SANYOU	Automotive Relay	获取价格
SARUK308M04BXL0	MURATA	暂无描述	获取价格