Programmable Single Phase Energy Metering
IC with Tamper Detection
SA2007P
ssames
FEATURES
+
+
Providesdirectinterfacetomechanicalcounters
Calibration and setup stored on external EEPROM - no
trimpotsrequired
+
+
+
+
+
Total power consumption rating below 50mW
Adaptable to different types of sensors
Operates over a wide temperature range
Precision voltage reference on-chip
Precision oscillator on chip
+
+
+
MonitorsbothLiveandNeutralfortamperdetection
Flexibleprogrammablefeatures
Meets the IEC 521/1036 Specification for Class 1 AC Watt
hourmeters
DESCRIPTION
continuously measured and the larger of the two is selected for
energy metering.
The SAMES SA2007P is a single phase bi-directional energy
metering integrated circuit. It provides a cost effective solution
for energy meters with electro-mechanical displays, such as
stepper motors and impulse counters. A precision oscillator,
that replaces an external crystal is integrated on chip.
The SA2007P drives the calibration LED, the indicator LEDs
and the electro-mechanical counter directly.
The SA2007P does not require any external trim-pots. All
required calibration and configuration data is read from a small
external EEPROM.
Two current sensor inputs allow the measurement of energy
consumption on both the live and neutral lines.
Direction detection of energy flow as well as other common
tamper conditions are flagged.
The SA2007P integrated circuit is available in 20 pin dual-in-
line plastic (DIP-20) and small outline (SOIC-20) package
types.
The power consumption on both the live and neutral are
VDD VSS
POWER 1 (DIGITAL)
IIN1
IIP1
ELT
COM-
ANALOG
SIGNAL
POWER 2 (DIGITAL)
SEL1
PARATOR
IIN2
IIP2
PROCESSING
AND
POWER
CALCULATION
IVP
GND
DIRO
LED
POWER
TO
IIC
BUS
PULSE
RATE
MOP
MON
VOLTAGE
REF.
INTERFACE
OSC
Dr-01594
VREF
TCLK
SCL SDA RLOAD
TEST
Figure 1: Block diagram
1/12
SPEC-0074 (REV. 2)
PRELIMINARY
16-01-01