PrO™ Programmable Clock Oscillator
5V, HCMOS, TTL, SMD
PrO™ S8002 Ceramic Series
Technical Data
Frequency Range:
1MHz to 125MHz
Frequency Stability:
±25**,±50or±100ppmoverallconditions:calibrationtolerance,
operating temperature, rated input (supply) voltage change, load
change, *aging, shock and vibration.
*Aging:
30 days
** ±25ppm not available for all frequencies
Temperature Range:
Supply Voltage:
Operating:
Storage:
-20 to +70°C or -40 to +85°C
-55 to +125°C
Recommended Operating:
5V ±10% (+7V absolute max)
Supply Current:
ACTUAL SIZE
5TTL +15pF Load:
30pF/15pF Load:
Stand-by:
40mA from 1 to 40MHz, 50mA from 40+ to 125MHz
40mA from 1 to 50MHz, 50mA from 50+ to 125MHz
50µA max (as selected)
Description
A crystal controlled, HCMOS/TTL
compatible oscillator with an internal
programming feature that allows SaRo-
nix to supply most frequencies in the 1
to 125MHz range. This technology sig-
nificantlyreduceslead-timesfromweeks
to days. The parts exhibit the same low
power, precise rise and fall times, tight
symmetryandHCMOS/TTLcompatible
drivecapabilityasconventionalSaRonix
SMD oscillators. The parts feature tri-
state enable or standby control on pad
1. The packages are miniature ceramic
SMD, measuring 5 x 7 x 1.8 mm.
Output Drive:
Symmetry:
45/55% measured @ 50% VDD (1 to 50 MHz, -20 to +70ºC, HCMOS)
45/55% measured @ 1.5V (1 to 27 MHz, -20 to +70ºC, TTL)
40/60% measured @ 50% VDD (HCMOS) or 1.5V (TTL) all other
conditions.
5ns max 20% to 80% VDD, 0.8 to 2V (TTL)
10% VDD max, 0.5V max (TTL)
90% VDD min, 2.5V min (TTL)
30pF max 1 to 50MHz, 15pF max 50+ to 125MHz or
5TTL +15pF 1 to 125MHz
Rise & Fall Times:
Logic 0:
Logic 1:
Load:
Period Jitter RMS:
17ps typ, 42ps max 33+ to 125MHz
33ps typ, 100ps max 1 to 33MHz
Output Enable (Tri-state Control) Function:
Output Oscillation:
Output High Impedance:
Disable Output Delay:
Internal Pullup Delay:
2.0V ≤ VIN ≤ (VDD + 0.5V), or N/C
-0.5V ≤ VIN ≤ 0.8V, or GND
≤ 100ns
Applications & Features
≥ 15kΩ
• Quick delivery of any frequency be-
tween 1 and 125MHz.
• SuitedforusewithnewHCMOSMPUs
and DSPs.
• Tri-State Output or Standby Mode
• High Drive HCMOS capability
• Stabilities of ±25, ±50, ±100ppm
• 3.0 & 3.3V versions are available, see
separate data sheet
Low-Power Stand-by Function:
Output Oscillation:
Stand-by Mode:
Control Input Current:
2.0V ≤ VIN ≤ (VDD + 0.5V), or N/C
-0.5V ≤ VIN ≤ 0.8V, or GND
≤ 10µA
Mechanical:
Shock:
Solderability:
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2003
Terminal Strength:
Vibration:
Solvent Resistance:
Resistance toSoldering Heat:
MIL-STD-883, Method 2004, Conditions D
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 215
• Available on tape & reel; 16mm tape,
500pcs per reel
• See S16xx series for low jitter
performance
MIL-STD-202, Method 210, Condition I or J
Environmental:
Thermal Shock:
Moisture Resistance:
MIL-STD-883C, Method 1011, Condition A
MIL-STD-883C, Method 1004
DS-214
REV B
08/02/04
www.pericom.com