PrO™ Programmable Clock
3.3V & 3.0V, HCMOS, SMD
PrO™ S8002 Ceramic Series
Technical Data
Frequency Range:
1MHz to 90MHz
Frequency Stability:
±25**, ±50 or ±100 ppm over all conditions: calibration tolerance,
operating temperature, rated input (supply) voltage change, load
change, *aging, shock and vibration.
*Aging:
30 days
** ±25ppm not available for all frequencies
Temperature Range:
Supply Voltage:
Operating:
Storage:
-20 to +70°C or -40 to +85°C
-55 to +125°C
Recommended Operating:
3.3V ±10% or 3.0V ±10% (+7V absolute max)
Supply Current:
25mA (1 to 40 MHz)
35mA (40+ to 90 MHz)
ACTUAL SIZE
50µA max (applicable to low-power stand-by mode only when specified)
Description
Output Drive:
45/55% measured @ 50% VDD (1 to 40 MHz, -20 to +70ºC, 3.3V only)
40/60% measured @ 50% VDD (all other conditions)
5ns max 20% to 80% VDD
0.4V max
VDD -0.4V min
30pF max 1 to 40MHz, 15pF max 40+ to 90MHz @ 3.3V
15pF max 1 to 40MHz @ 3.0V
25ps typ, 50ps max 33+ to 90 MHz
33ps typ, 100ps max 5+ to 33 MHz
117ps typ, 167ps max 1 to 5 MHz
Symmetry:
Acrystalcontrolled, HCMOScompatible
oscillator with an internal programming
feature that allows SaRonix to supply
most frequencies in the 1 to 90MHz
range. This technology significantly re-
duceslead-timesfromweekstodays.The
partsexhibitthesamelowpower, precise
rise and fall times, tight symmetry and
HCMOSdrivecapabilityasconventional
SaRonix SMD oscillators. The parts fea-
ture tri-state enable or standby control on
pad1.Thepackagesareminiatureceramic
SMD, measuring 5 x 7 x 1.8 mm.
Rise & Fall Times:
Logic 0:
Logic 1:
Load:
Period Jitter RMS:
Output Enable (Tri-state Control) Function:
Output Oscillation:
Output High Impedance:
Disable High Delay:
(70% VDD) ≤ VIN ≤ (VDD + 0.5V), or N/C
(-0.5V) ≤ VIN ≤ (30% VDD), or GND
≤ 100ns
≥ 15kΩ
Internal Pullup Resistance:
Low-Power Stand-by Function:
Output Oscillation:
Applications & Features
(70% VDD) ≤ VIN ≤ (VDD + 0.5V), or N/C
(-0.5V) ≤ VIN ≤ (30% VDD), or GND
≤ 10µA
• Quick delivery of any frequency be-
tween 1 and 90MHz.
Stand-by Mode:
Control Input Current:
• SuitedforusewithnewHCMOSMPUs
and DSPs.
Mechanical:
Shock:
Solderability:
Terminal Strength:
Vibration:
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2003
MIL-STD-883, Method 2004, Condition D
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 215
• Tri-State output or standby mode
• High Drive HCMOS capability
• Stabilities of ±25, ±50, ±100ppm
• 5.0V version is available, see separate
data sheet
Solvent Resistance:
Resistance toSoldering Heat:
MIL-STD-202, Method 210, Condition I or J
• Available on tape & reel; 16mm tape,
500pcs per reel
• See S16xx series for low jitter
performance
Environmental:
Thermal Shock:
Moisture Resistance:
MIL-STD-883C, Method 1011, Condition A
MIL-STD-883C, Method 1004
DS-213
REV B
08/02/04
www.pericom.com