CCD area image sensors
S7170-0909 S7171-0909-01
512 × 512 pixels, back-thinned FFT-CCD
HAMAMATSU developed MPP (multi-pinned phase) mode back-thinned FFT-CCDs S7170-0909, S7171-0909-01 speci¿cally
designed for low-light-level detection in scienti¿c applications. The S7170-0909, S7171-0909-01 have sensitivity from the
UV to near-IR as well as having low dark current and wide dynamic range. Stability of the spectral response curve is also
achieved for high precision measurements.
Either one-stage or two-stage thermoelectric cooler is built into the package (S7171-0909-01, S7172-0909). At room tem-
perature operation, the device can be cooled down to -10 °C by one-stage cooler and -30 °C by two-stage cooler, respec-
tively. In addition since both the CCD chip and the thermoelectric cooler are hermetically sealed, no dry air is required, thus
allowing easy handling.
Features
Applications
512 × 512 pixel format
Scienti¿c measuring instrument
Semiconductor inspection
UV imaging
Greater than 90% quantum efficiency at peak sensitivity
wavelength
Wide spectrum range
Low readout noise
Wide dynamic range
MPP operation
Bio-photon observation
Non-cooled type: S7170-0909
One-stage TE-cooled type: S7171-0909-01
Selection guide
Image size
[mm (H) × mm (V)]
Number of effective
pixels
Suitable multichannel
detector head
Type no.
Cooling
Number of total pixels
532 × 520
S7170-0909
S7171-0909-01
Non-cooled
One-stage TE-cooled
C7180
C7181
512 × 512
12.288 × 12.288
Note: Two-stage TE-cooled type (S7172-0909) is also available.
Structure
Parameter
S7170-0909
S7171-0909-01
Pixel size
24 (H) × 24 (V) m
Vertical clock phase
Horizontal clock phase
Output circuit
Package
2 phases
2 phases
One-stage MOSFET source follower
24-pin ceramic DIP (refer to dimensional outlines)
Window
Sapphire*1
AR-coated sapphire
*1: Window-less type (ex. S7170-0909N) is available upon request.
(Temporary window is ¿xed by tape to protect the CCD chip and wire bonding.)
1
www.hamamatsu.com