Current Relays Type SolarYes
Current-Relay SolarYes
Monitoring of Function at Photovoltaic Systems,
Detection of Failure at Inverters, 8 inputs
Thedeviceismountedinaswitchcabinetoradistribution
The SolarYes monitors outputs
of inverters in PV-systems. Its
output-relays (2 potential-free
contacts) switch, when there
has been no current during the
last 24 hours in one of up to 8
monitored lines. Thus the failure
ofaninverterorafuseisdetected
and reported. The operator can
initiate repair immediately and
saves downtime.
SolarYes AC
box. The current is measured contactless with simple
andsolidcurrenttransformers,thataremountedoverthe
line at any position, e.g. near the fuses. A subsequent
installation in an existent system is possible.
Over the course of 24 hours occurring minimal cur-
rents (at night there can be wattles currents, caused
by interference suppression capacitors in the inverter)
are automatically measured and faded out in the eva-
luation.
The minimum response limit of 0,3 A allows measu-
ring of low current-levels. The limit can de reduced by
leading the monitored line multiple times through the
transformer (Ø 11 mm).
The SolarYes is a simple, easily
understandable and economical
solution,thatprotectsPV-systems
from downtimes.
In case of false alarms, e.g. with snow on the solar
modules, the monitoring interval can be extended to
up to 8 days or the alarm can be suppressed with a
switch.
Part number:
S225535
The 2 output-relays can switch alarm-lamps or elec-
troacoustic transducers. The connection of an alarm
system or another monitoring unit also is possible.
Displays and Controls:
Inputs:
Function
•
•
•
•
•
•
•
8 LEDs for inputs
8 LEDs for alarms
4 LEDs for display of state and programming
2 LEDs for relays
1 LED enable-input
8 inputs for current transfor-
mers STWA1 or STWA1H
(max. 100 A)
•
•
Not connected inputs discon-
nectible
3 pushbuttons
Sensitivity adjustable AC
0,3…2,4 A (lower values by
leading the monitored line
multiple times through the
transformer)
Other features:
•
2 change-over contacts, nc and no individually
programmable
•
•
Autocalibration of inputs
Enable-input
•
•
•
•
•
Autocalibration for easy startup
Power-saving (Eco-Mode), disconnectible
Power consumption <0,5 W, <1,2 VA
Universal supply-voltage AC/DC 24-240 V
HousingforDIN-railmount,70mm,mountingheight
55 mm
Current transformers STWA1 and STWA1H
For measuring the current, cur-
The STWA1H can be fixed on a DIN-rail or mounted
with 2 screws. The electrical connection is made via
pluggable terminals.Abuilt-in LED lights up at currents
> app. 2 A.
rent transformers STWA1 and
STWA1Hareused, oneforevery
monitored line.
The STWA1 consist of a climate-
proven sealed-in coil with 2 x 1
m cable.
The inner diameter of both current transformers is
11 mm, the maximum current is 100 A.
Part numbers:
S225201
STWA1
S225506
STWA1H
116 ZIEHL industrie-elektronik, 74523 Schwäbisch Hall, Germany, +49 791 504-0, info@ziehl.de, www.ziehl.de