PRECISION BULK METAL® FOIL TECHNOLOGY
S Series
High Performance Aerospace and Instrumentation Resistors
•Power Rating: 0.6 to 2.0 Watts a +70°C; 0.3 to 1.0 Watts at
+125°C (depending on model)
•Load Life Stability:± 50ppm Max∆R (@70°C, 2,000 hrs at rated
power)
•Resistance Tolerance (Initial Resistance Accuracy):
±0.005% tightest to ±1.0% loosest (depends on resistor value)
•Resistance Range: 0.5Ω to 1 MΩ
•Current Noise: 0.010 µV (RMS) / Volt of Applied Voltage
•Thermal EMF: 0.1 µV / °C Maximum; 0.05 µV / °C Typical;
1 µV / Watt (Model S102C, S102K)
FEATURES
From -55°C to +125°C with 25 °C as reference:
•S102K Series Nominal Temperature Coefficient of Resistance:
Resistance value 80 Ω to 100KΩ 50Ω to 80Ω 1Ω to 50Ω
TCR
1±2.5 ppm
1±3.5 ppm 1±4.5 ppm
•S102C Series Nominal Temperature Coefficient of Resistance:
Resistance value 80 Ω to 150KΩ 50Ω to 80Ω 1Ω to 50Ω
TCR
2±2.5 ppm
2±3.5 ppm 2±4.5 ppm
•Rise/Decay Time: 1.0 Nanosecond @ 1KΩ
•Selected TCR Tracking: to 0.5 ppm/°C (matched sets)
•For better TCR performance please review the Z201 datasheet.
•Terminal finishes available: lead free or tin/lead alloy.
Value
Model
Max
Power
Tolerances
Available
Dimensions
Range Voltage 70ºC 125ºC
1Ω
to
0.6W
0.3W
W: 0.105 ±0.010
L: 0.300 ±0.010
H: 0.326 ±0.010
ST: 0.010 Min
SW: 0.040 ±0.005
LL: 1.000 ±0.125
LS: 0.150 ±0.005
S102C
up to 100KΩ
(S102J)1
150KΩ*
300
1Ω
to
100KΩ
S102K
0.4W
1.0W
0.2W
(S102L)1
over 100KΩ
1Ω
to
500KΩ
0.5W
W: 0.160 Max
L: 0.575 Max
H: 0.413 Max
ST: 0.035 ±0.005
SW: 0.050 ±0.005
LL: 1.000 ±0.125
LS: 0.400 ±0.020
S104D
S104K
S105D
up to 200KΩ
±0.005%: 50Ω - 2MΩ
1Ω
to
300KΩ
±0.01%:
±0.02%:
±0.05%:
±0.1%:
±0.25%:
±0.5%:
10Ω - 2MΩ
5Ω - 2MΩ
2Ω - 2MΩ
1Ω - 2MΩ
1Ω - 2MΩ
1Ω - 2MΩ
0.5Ω - 2MΩ
0.6W
1.5W
0.3W
over 200KΩ
350
1Ω
to
750KΩ
0.75W
W: 0.160 Max
L: 0.820 Max
H: 0.413 Max
up to 300KΩ
±1.0%:
ST: 0.035 ±0.005
SW: 0.050 ±0.005
LL: 1.000 ±0.125
LS: 0.650±0.020
1Ω
to
500KΩ
0.8W
0.4W
S105K
S106D
over 300KΩ
2.0W
1.0W
0.5Ω
to
W: 0.260 Max
L: 1.200 Max
up to 400KΩ
2MΩ
500
H: 0.413 Max
ST: 0.035 ±0.005
SW: 0.050 ±0.005
LL: 1.000 ±0.125
LS: 0.900±0.0
1.0W
0.5W
0.5Ω
to
600KΩ
S106K
over 400KΩ
1S102J and S102L resistors have a 0.2” lead space.
*Texas Components can build single resistors to 250K
and is approved to DSCC Dwg. 89039
For an axial lead version of the S Series, we also produce the TXA Series
Rev.10/09
Texas Components Corporation • 1716 West Sam Houston Parkway North • Houston, TX 77043
Phone:(713)468-3882 • Fax: (713)461-2098 • Website: www.texascomponents.com