®
RTQ6363
60VIN, 3.5A, Asynchronous Step-Down Converter with Low
Quiescent Current
General Description
Features
Wide Input Voltage Range
The RTQ6363 is a 3.5A, high-efficiency, peak current mode
control asynchronous step-down converter. The device
operates with input voltages from 4V to 60V. The device
can program the output voltage between 0.8V to VIN. The
low quiescent current design with the integrated low RDS(ON)
of high-side MOSFET achieves high efficiency over the
wide load range. The peak current mode control with simple
external compensation allows the use of small inductors
and results in fast transient response and good loop
stability.
4.5V to 60V
4V to 60V (Soft-start is finished)
Wide Output Voltage Range : 0.8V to VIN
0.8V 1% Reference Accuracy
Peak Current Mode Control
Integrated 80mΩ High-Side MOSFET
Low Quiescent Current : 100μA
Low Shutdown Current : 2.25μA
Adjustable Switching : 100kHz to 2.5MHz
Synchronizable Switching : 300kHz to 2.2MHz
Power Saving Mode (PSM) at Light Load
Low Dropout at Light Loads with Integrated Boot
Recharge FET
The wide switching frequency of 100kHz to 2500kHz allows
for efficiency and size optimization when selecting the
output filter components. The ultra-low minimum on-time
enables constant-frequency operation even at very high
step-down ratios. For switching noise sensitive
applications, it can be externally synchronized from
300kHz to 2200kHz.
Externally Adjustable Soft-Start by Part Number
Option
Power Good Indication by Part Number Option
Enable Control
The RTQ6363 provides complete protection functions such
as input under-voltage lockout, output under-voltage
protection, output over-voltage protection, over-current
protection, and thermal shutdown. Cycle-by-cycle current
limit provides protection against shorted outputs, and soft-
start eliminates input current surge during start-up. The
RTQ6363 is available in WDFN-10L 4x4 and SOP-8
(Exposed pad) packages.
Adjustable UVLO Voltage and Hysteresis
Built-In UVLO, UVP, OVP, OCP, OTP
Applications
Communications and Industrial 12V, 24V and 48V Power
Systems
IndustrialAutomation and Motor Control
Vehicle Accessories : GPS, Entertainment
Simplified Application Circuit
C
C
BOOT
BOOT
RTQ6363GQW
RTQ6363GSP
V
IN
V
IN
VIN
VIN
BOOT
BOOT
L1
L1
C
SW
FB
V
OUT
C
SW
V
OUT
IN
IN
D1
D1
R
C
C
OUT
FB1
OUT
R
R
EN
FB1
Enable Signal
PGOOD
EN
Enable Signal
FB
PGOOD
R
RT
R
FB2
FB2
RT/SYNC
COMP
C
R
COMP
COMP1
COMP
R
C
COMP
COMP1
C
SS/TR
R
RT
C
SS
C
COMP2
COMP2
RT/SYNC
PAD
GND
GND
PAD
Copyright 2020 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DSQ6363-01 May 2020
www.richtek.com
1