®
RTQ2533W
3A, 6.5V, Ultra Low Noise, Ultra Low Dropout Linear Regulator
General Description
Features
Input Voltage Range : 1.1V to 6.5V
The RTQ2533W is a high-current (3A), low-noise
(6.8μVRMS), high accuracy (1% over line, load, and
temperature), low-dropout linear regulator (LDO) capable
of sourcing 3A with extremely low dropout (max. 180mV).
The device output voltage is pin-selectable (up to 3.95V)
using a PCB layout without the need of external resistors,
thus reducing overall component count. Designers can
achieve higher output voltage with the use of external
resistor divider. The device supports single input supply
voltage as low to 1.1V that makes it easy to use.
Two Output Voltage Modes
0.8 V to 5.5V (Set by a Resistive Divider)
0.8 V to 3.95V (Set via PCB Layout, No External
Resistor Required)
Accurate Output Voltage Accuracy (1%) Over Line,
Load and Temperature
Ultra High PSRR : 40dB at 500kHz
Excellent Noise Immunity
6.8μVRMS at 0.8V Output
10μVRMS at 3.3V Output
Ultra Low Dropout Voltage : 180mV at 3A
Enable Control
The low noise, high PSRR and high output current capability
makes the RTQ2533W ideal to power noise-sensitive
devices such as analog-to-digital converters (ADCs),
digital-to-analog converters (DACs), and RF components.
With very high accuracy, remote sensing, and soft-start
capabilities to reduce inrush current, the RTQ2533W is
ideal for powering digital loads such as FPGAs, DSPs,
andASICs.
Programmable Soft-Start Output
Stable with a 47μF or Larger Ceramic Output
Capacitor
Support Power-Good Indicator Function
RoHS Compliant and Halogen Free
The external enable control and power good indicator
function makes the control sequence easier. The output
noise immunity is enhanced by adding external bypass
capacitor onNR/SS pin. The device is fully specified over
the temperature range of TJ = −40°C to 125°C and is
offered in a VQFN-20L 3.5x3.5 package.
Applications
Portable ElectronicDevice
Wireless Infrastructure : SerDes, FPGA, DSP
RF, IF Components : VCO, ADC, DAC, LVDS
Pin Configuration
(TOP VIEW)
Ordering Information
RTQ2533W
20 19 18 17 16
Pin 1 Orientation***
1
2
3
4
5
15
14
13
12
11
VOUT
SNS
FB
PGOOD
50mV
VIN
EN
NR/SS
NC
(2) : Quadrant 2, Follow EIA-481-D
Package Type
QV : VQFN-20L 3.5x3.5 (V-Type)
GND
21
10
1.6V
Lead Plating System
G : Green (Halogen Free and Pb Free)
Note :
6
7
8
9
***Empty means Pin1 orientation is Quadrant 1
Richtek products are :
VQFN-20L 3.5x3.5
RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
Suitable for use in SnPb or Pb-free soldering processes.
Copyright 2019 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DSQ2533W-00 April 2019
www.richtek.com
1