®
RTQ2522A/B
2A Ultra-Low Dropout Voltage LDO Regulators with Soft-Start
General Description
Features
Ultralow VIN Range : 0.8V to 5.5V
The RTQ2522A/B is a very low dropout linear regulator
which operates from input voltage as low as 0.8V. The
device is capable of supplying 2Aof output current with a
typical dropout voltage of only 135mV. AVBIAS supply is
required to run the internal reference and LDO circuitry
while output current comes directly from the VIN supply
for high efficiency regulation. User-programmable soft-start
limits the input inrush current and minimizes stress on
the input power. The enable input and power good output
allow easy sequencing with external regulators. This
complete flexibility provides an easy-to-use robust power
management solution for a wide variety of applications.
VBIAS Voltage Range : 2.7V to 5.5V
VOUT Voltage Range : 0.8V to 3.6V
Low Dropout : 135mV Typ at 2A, VBIAS = 5V
2% Accuracy Over Line/Load/ Temperature
PGOOD Indicator for Easy Sequence Control
Programmable Soft-Start Provides Linear Voltage
Startup
Stable with Any Output Capacitor ≥ 2.2μF
Over-Current and Over-Temperature Protection
Ordering Information
RTQ2522A/B
The RTQ2522A/B is stable with output capacitor greater
than or equal to 2.2μF. A precise reference and error
amplifier deliver 2% accuracy over load, line and
temperature. Over-current limit and over-temperature
protection are also included. The RTQ2522A/B is available
in the WDFN-10L 3x3 and WQFN-20L 5x5 packages.
Pin 1 Orientation***
(2) : Quadrant 2, Follow EIA-481-D
Package Type
QW : WDFN-10L 3x3 (W-Type)
QW : WQFN-20L 5x5 (W-Type)
Lead Plating System
G : Green (Halogen Free and Pb Free)
Applications
PCs, Servers, Modems, and Set-Top-Boxes
A : WDFN-10L 3x3
B : WQFN-20L 5x5
FPGA Applications
Note :
DSP Core and I/O Voltages
Instrumentation
***Empty means Pin1 orientation is Quadrant 1
Richtek products are :
Post-RegulationApplications
Applications With Sequencing Requirements
RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
Suitable for use in SnPb or Pb-free soldering processes.
Simplified Application Circuit
RTQ2522A/B
VIN
V
IN
PGOOD
R
PGOOD
C
IN
EN
V
VOUT
FB
OUT
C
OUT
V
VBIAS
BIAS
R1
C
BIAS
SS
R2
C
SS
GND
Copyright 2017 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DSQ2522A/B-00 April 2017
www.richtek.com
1