RT9535
High Efficiency Switching Mode Battery Charger
General Description
Features
The RT9535 is a PWM switch mode battery charger
controller to fast charge single or multiple Li-Ion, NiMH
and NiCd batteries, using constant current or constant
voltage control. Maximum current can be easily
programmed by external resistor. The constant voltage
output can support up to 22V with 0.5% accuracy.
A third control loop limits the input current drawing from
the adapter during charging. This allows simultaneous
operation of the equipment and fast battery charging
without over loading to the adapter.
Fast Charging for Li-Ion, NiMH and NiCd Batteries
Adjustable Battery Voltages from 2.5V to 22V
High Efficiency : Up to 95%
Charging Current Programmed by Resistor
Precision 0.5% Charging Voltage Accuracy
Provide 5% Charging Current Accuracy
Input Current Limit Maximizes Charging Rate
500kHz Switching Frequency
Flag Indicates Li-Ion Charge Completion
Auto Shutdown with Adapter Removal
Only 10A Battery Reverse Current when Idle
The RT9535 can charge batteries from 2.5V to 22V
with dropout voltage as low as 0.4V. A logic output
indicates Li-Ion full charge when current drops to 17%
of the full-scale programmed charge current.
The RT9535 is available in the WQFN-24L 4x4
package.
Applications
Notebook Computers
Portable Instruments
Chargers for Li-lon, NiMH, NiCd and Lead Acid
Rechargeable Batteries
Simplified Application Circuit
RS4
M1
V
IN
C2
R2
C
IN
C1
R1
ACN
ACP
HSD
V5V
RT9535
D2
D3
To VHH Pin
R9
ACDRV
NTC
C7
R
EN
NTC
R10
VIN
BOOT
SW
C8
ISET
VC
L1
RS1
RS2
V
BATT
R3
C3
C
BATT
SS
D1
R5
C4
R4
RF2
RF1
RS3
PGND
C5
VFB
VFB
To VFB Pin
To FBR Pin
SNSH
SNSL
SGND
FBR
FBR
VHH
BATT
VHH
C11
STATUS
C6
GND
(Exposed Pad)
C9
Copyright © 2016 Richtek Technology Corporation. All rights reserved.
is a registered trademark of Richtek Technology Corporation.
DS9535-04 February 2016
www.richtek.com
1