RT9017
500mA Peak, Thermal Folded Back CMOS LDO Regulator
General Description
Features
z Short Circuit Thermal Folded Back Protection
The RT9017 is designed for portable RF and wireless
applications with demanding performance and space
requirements. The RT9017 performance is optimized for
battery-powered systems to deliver ultra low noise and
low quiescent current. Regulator ground current increases
only slightly in dropout, further prolonging the battery life.
The RT9017 also works with low-ESR ceramic capacitors,
reducing the amount of board space necessary for power
applications, critical in hand-held wireless devices. The
RT9017 consumes less than 0.01μA in shutdown mode
and has fast turn-on time less than 50μs. RT9017 is short
circuit thermal folded back protected. RT9017 lowers its
OTP trip point from 165°C to 110°C when output short
circuit occurs (VOUT < 0.4V) providing maximum safety to
end users. The other features include ultra low dropout
voltage, high output accuracy, current limiting protection,
and high ripple rejection ratio. Available in the SOT-23-3,
SOT-23-5 and WDFN-6L 2x2 packages, the RT9017 also
offers a range of 1.5V to 3.5V with 0.1V per step.
z Low-Noise for RF Application
z Fast Response in Line/Load Transient
z Quick Start-Up (Typically 50μs)
z 0.01μA Standby Current When Shutdown
z Low Dropout : 380mV @ 500mA
z Wide Operating Voltage Ranges : 2.5V to 5.5V
z TTL-Logic-Controlled Shutdown Input
z Low Temperature Coefficient
z Current Limiting Protection
z Thermal Shutdown Protection
z Only 1μF Output Capacitor Required for Stability
z High Power Supply Rejection Ratio
z Custom Voltage Available
z RoHS Compliant and 100% Lead (Pb)-Free
Applications
z CDMA/GSM Cellular Handsets
z Battery-Powered Equipment
z Laptop, Palmtops, Notebook Computers
z Hand-Held Instruments
Ordering Information
RT9017-
z PCMCIA Cards
Package Type
V : SOT-23-3
z Portable InformationAppliances
B : SOT- 23-5
BR : SOT- 23-5 (R-Type)
QW : WDFN-6L 2x2 (W-Type)
Marking Information
For marking information, contact our sales representative
directly or through a Richtek distributor located in your
area.
Lead Plating System
P : Pb Free
G : Green (Halogen Free and Pb Free)
Output Voltage
15 : 1.5V
16 : 1.6V
:
34 : 3.4V
35 : 3.5V
1H : 1.85V
Pin Configurations
(TOP VIEW)
1
2
3
6
5
4
EN
GND
VIN
NC
NC
VOUT
7
WDFN-6L 2x2
2H : 2.85V
Note :
VIN
Richtek products are :
3
` RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
2
` Suitable for use in SnPb or Pb-free soldering processes.
GND
VOUT
SOT-23-3
DS9017-05 April 2011
www.richtek.com
1