RT8008
1.5MHz, 600mA, High Efficiency PWM Step-Down DC/DC
Converter
General Description
Features
z 2.5V to 5.5V Input Range
The RT8008 is a high-efficiency pulse-width-modulated
(PWM) step-downDC/DC converter. Capable of delivering
600mAoutput current over a wide input voltage range from
2.5V to 5.5V, the RT8008 is ideally suited for portable
electronic devices that are powered from 1-cell Li-ion
battery or from other power sources within the range such
as cellular phones, PDAs and handy-terminals.
z Adjustable Output From 0.6V to VIN
z 1.0V, 1.2V, 1.5V, 1.8V, 2.5V and 3.3V Fixed/
Adjustable Output Voltage
z 600mA Output Current, 1A Peak Current
z 95% Efficiency
z No Schottky Diode Required
z 1.5MHz Fixed Frequency PWM Operation
z Small SOT-23-5 and TSOT-23-5 Package
z RoHS Compliant and 100% Lead (Pb)-Free
Internal synchronous rectifier with low RDS(ON) dramatically
reduces conduction loss at PWM mode. No external
Schottky diode is required in practical application. The
RT8008 automatically turns off the synchronous rectifier
while the inductor current is low and enters discontinuous
PWM mode. This can increase efficiency at light load
condition.
Applications
z Cellular Telephones
z Personal InformationAppliances
z Wireless and DSL Modems
z MP3 Players
The RT8008 enters Low-Dropout mode when normal PWM
cannot provide regulated output voltage by continuously
turning on the upper P-MOSFET. RT8008 enter shutdown
mode and consumes less than 0.1μAwhen ENpin is pulled
low.
z Portable Instruments
Ordering Information
RT8008(-
)
Package Type
B : SOT-23-5
J5 : TSOT-23-5
The switching ripple is easily smoothed-out by small
package filtering elements due to a fixed operation
frequency of 1.5MHz. This along with small SOT-23-5 and
TSOT-23-5 package provides small PCB area application.
Other features include soft start, lower internal reference
voltage with 2% accuracy, over temperature protection,
and over current protection.
Lead Plating System
P : Pb Free
G : Green (Halogen Free and Pb Free)
Output Voltage
Default : Adjustable
10 : 1.0V
12 : 1.2V
15 : 1.5V
18 : 1.8V
Pin Configurations
(TOP VIEW)
25 : 2.5V
FB/VOUT
VIN
33 : 3.3V
5
4
Note :
Richtek products are :
2
3
GND LX
EN
` RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
SOT-23-5/TSOT-23-5
` Suitable for use in SnPb or Pb-free soldering processes.
Marking Information
For marking information, contact our sales representative
directly or through a Richtek distributor located in your
area.
DS8008-07 March 2011
www.richtek.com
1