RT7207KB
Highly Integration USB PD Controller with Synchronous
Rectification
General Description
Features
Protocol Support
The RT7207KB is a programmable controller with
integrated synchronous rectification control. Its internal
MCU handles various proprietary protocols via the
D+/D- interface and supports USB PD Type-C via the
CC1/CC2 pins.
USB PD2.0/PD3.0 and PPS
Proprietary Protocols
Highly Integrated
Embedded MCU with an Mask ROM of 32kB, an
OTP-ROM of 16kB, and an SRAM of 2kB
Built-in Synchronous Rectifier Controller and
Driver
The RT7207KB provides high integration for high
power density off-line AC-DC converter designs. In
addition to saving external components, and through
the built-in synchronous rectification controller and
integration of diverse functions and protections, it not
only improves efficiency but also enhances safety.
Built-in Charge Pump for a Wide VDD Operation
Range of 3V to 21V
Built-in Shunt Regulators for Programmable
Constant-Voltage and Constant-Current
Control
An internal synchronous rectifier controller can
optimize efficiency and provide safe operate in both
continuous-conduction
mode
(CCM)
and
discontinuous-conduction mode (DCM) even in the
condition of a wide output voltage range of 3.0V to 21V.
Built-in 10-bit Analog-to-Digital Converter (ADC)
Programmable Cable Compensation
BLD Pin for Quick Discharge of Output
Capacitor
Dual operational amplifiers with respectively the
digital-to-analog converter (DAC) programmable
reference voltages are included for voltage-loop and
current-loop regulation to provide programmable
constant-voltage (CV) and constant-current (CC)
regulation in high precision.
VBUS Pin for Detection VBUS Voltage and
Quick Discharge of VBUS Capacitor
USBP Pin for Direct Drive of External Blocking
N-MOSFET
Power-Saving Mode in Standby Mode
Protection
Ordering Information
-
RT7207KB
Adaptive Output Over-Voltage Protection
Adaptive Under-Voltage Protection
CC1/CC2/D+/D- Over-Voltage Protection
Firmware-Programmable Over-Current
Protection
Programmed Firmware Code AABBX
AA : Application Code
BB : Model Code
X : Customer Approved Version Code
Package Type
QW : WQFN-24L 4x4 (W-Type)
(Exposed Pad-Option 2)
Firmware-Programmable Over-Temperature
Protection
Lead Plating System
G : Green (Halogen Free and Pb Free)
RT7207KB Version
(Refer to Version Table)
Applications
USB PD Type-C or Proprietary Protocols (e.g., FCP,
SCP and AFC) Chargers/Adapters for Smart Phones,
NBs, Tablets and All Other Electronics.
USB PD Extension Cores with Offline AC-DC
Converters.
Note :
The products are :
RoHS compliant and compatible with the current
requirements of IPC/JEDEC J-STD-020.
Suitable for use in SnPb or Pb-free soldering processes.
Copyright © 2018 Richtek Technology Corporation. All rights reserved.
is a registered trademark of Richtek Technology Corporation.
DS7207KB-00 December 2018
www.richtek.com
1