RT6353A/B
17V Input, 3A, ACOT® Buck Converter with Both FETs OC
Protection
General Description
Features
The RT6353A/B is
a
simple, easy-to-use, 3A
⚫ Integrated 95m and 50m FETs
synchronous step-down DC-DC converter with an input
supply voltage range of 4.5V to 17V. The device
possesses an accurate reference voltage and
⚫ Continuous Current
TSOT-23-6 (FC) : 3A
SOT-563 (FC) : 2.5A
integrates low R
high efficiency.
power MOSFETs to achieve
DS(ON)
⚫ Input Supply Voltage Range : 4.5V to 17V
⚫ Output Voltage Range : 0.6V to 7V
The RT6353A/B adopts Advanced Constant On-Time
®
⚫ Advanced Constant On-Time (ACOT ) Control
®
(ACOT ) control architecture to provide an ultrafast
Ultrafast Transient Response
Optimized for Low-ESR Ceramic Output
Capacitors
transient response with few external components and
to operate in nearly constant switching frequency over
the line, load, and output voltage range. The RT6353A
operates in automatic PSM that maintains high
efficiency during light load operation. The RT6353B
operates in Forced PWM that helps meet tight voltage
regulation accuracy requirements.
⚫ High Accuracy Feedback Reference Voltage :
1%
⚫ Optional for Operation Modes :
RT6353A : Power Saving Mode (PSM)
RT6353B : Forced PWM Mode
The RT6353A/B senses both FETs current for a robust
over-current protection (OCP). The device features
cycle-by-cycle current limit protection to prevent the
device from the catastrophic damage in output short
circuit, over-current or inductor saturation conditions. A
built-in soft-start function prevents inrush current during
start-up. The device also includes input under-voltage
lockout, output under-voltage protection, and
over-temperature protection (OTP) to provide safe and
smooth operation in all operating conditions.
⚫ Fixed Switching Frequency : 580kHz
⚫ Enable Control and Fixed Soft-Start with typ.
1ms
⚫ Safe Start-Up from Pre-biased Output
⚫ Input Under-Voltage Lockout (UVLO)
⚫ Protection Function
Output Under-Voltage Protection (UVP) with
Hiccup Mode
High- / Low-side MOSFET OCP and OTP
Function
The recommended junction temperature range is
−40C to 125C.
⚫ RoHS Compliant and Halogen Free
Simplified Application Circuit
R
BOOT
RT6353A/B
(Optional)
V
VIN
IN
BOOT
C
C
IN
BOOT
L
SW
V
OUT
C
OUT
C
FF
Enable
EN
R
R
FB1
FB
GND
FB2
Copyright © 2023 Richtek Technology Corporation. All rights reserved.
is a registered trademark of Richtek Technology Corporation.
DS6353A/B-01
September 2023
www.richtek.com
1