RT6262A/B
17V Input, 2A, ACOT® Buck Converter with Both FETs OC
Protection
General Description
Features
⚫ 2A Converter Integrated 125m and 56m FETs
⚫ Input Supply Voltage Range : 4.5V to 17V
⚫ Output Voltage Range : 0.765V to 7V
The RT6262A/B is
a
simple, easy-to-use, 2A
synchronous step-down DC-DC converter with an input
supply voltage range of 4.5V to 17V. The device
possesses an accurate reference voltage and
®
⚫ Advanced Constant On-Time (ACOT ) Control
Ultrafast Transient Response
Optimized for Low-ESR Ceramic Output
Capacitors
integrates low R
high efficiency.
power MOSFETs to achieve
DS(ON)
The RT6262A/B adopts Advanced Constant On-Time
®
⚫ High Accuracy Feedback Reference Voltage : Typ.
1%
(ACOT ) control architecture to provide an ultrafast
transient response with few external components and
to operate in nearly constant switching frequency over
the line, load, and output voltage range. The RT6262A
operates in automatic PSM that maintains high
efficiency during light load operation. The RT6262B
operates in Forced PWM that helps meet tight voltage
regulation accuracy requirements.
⚫ Optional for Operation Modes :
RT6262A : Power Saving Mode (PSM)
RT6262B : Forced PWM Mode
⚫ Fixed Switching Frequency : 650kHz
⚫ Enable Control and Externally Adjustable
Soft-Start
The RT6262A/B senses both FETs current for a robust
over-current protection (OCP). The device features
cycle-by-cycle current limit protection to prevent the
device from the catastrophic damage in output short
circuit, over-current or inductor saturation conditions.
The RT6262A/B offers programmable start-up by
connecting a capacitor at external SS pin. The device
also includes input under-voltage lockout, output
under-voltage protection, and over-temperature
protection (OTP) to provide safe and smooth operation
in all operating conditions.
⚫ Input Under-Voltage Lockout (UVLO)
⚫ Protection Function
Output Under-Voltage Protection (UVP) with
Hiccup Mode
High- / Low-side MOSFET OCP and OTP
Function
⚫ Power Good Indication
⚫ RoHS Compliant and Halogen Free
The recommended junction temperature range is
−40C to 125C.
Simplified Application Circuit
R
BOOT
RT6262A/B
(Optional)
V
VIN
BOOT
IN
C
C
BOOT
IN
V
SW
OUT
L
C
OUT
C
FF
Enable
EN
R
FB1
R
T
R
PGOOD
FB
V
PGOOD
SS
PGOOD
R
FB2
C
SS
GND
Copyright © 2024 Richtek Technology Corporation. All rights reserved.
is a registered trademark of Richtek Technology Corporation.
DS6262A/B-02 January 2024
www.richtek.com
1