®
RT6010
Dual Channel High Efficiency and High Accuracy Average
Current Control LED Backlight Buck Controller
General Description
Features
z Fast Average Current Control T2C (T1/T2 Average
The RT6010 is a dual channel high accuracy average current
control LEDbacklight buck controller for 2 LEDstrings w/
o LED binning. Dual MOSFET drivers are specifically
designed to drive two power N-MOSFETs in an
asynchronous buck converter topology. The controller
provides variable LED current control by adjusting the CS
resistor value for digital and linear dimming. The controller
operates with T1/T2Average Current Control (T2C) topology
to provide high accuracy 3%. The controller also provides
high efficiency (higher than 95%) under proper setting
without LED binning. The controller provides VIN from 8V
to 450V. It is preferred to operate the controller under a
current ripple of < 30% average current and about 85%
duty to optimize the performance.
Current Control)
z Dual MOSFET Drives for Asynchronous Buck
Topology
z Provide High Efficiency > 95% and High Accuracy
3% Channel to Channel Variation
z Provide LED w/o Binning
z Programmable PWM Constant Off Time
z Support both PWM and Analog Dimming
z PWM Dimming Duty Down to 1%
z OVP for Bar Short with VIN
z UVP for Bar Open/Short to GND with
programmable Fault Delay
z Support SPD (Smart Phase Shift Dimming) for
Multiple Channel Dimming Solution
z VIN POR Detection with EN Pin to Prevent
Malfunction
The RT6010 can be easily connected in series by master/
slave synchronization for multiple channel, even for more
than 6-CH. The controller provides SPD(Smart Phase Shift
Dimming) that is easily implemented to synchronize master
and slave ICs. The controller provides both analog and
PWM dimming.
z SOP-16 Package
z RoHS Compliant and Halogen Free
Applications
The RT6010 automatically detects LED bar open, LED
bar short to VIN, and LED bar short to GND to prevent
VOUT from over/under voltage damages. The controller
also outputs fault signal with programmable delay to
previous power stage, such asACDC controller.
z LCD TV, MNT Display Backlight
z DC/DC orACDC LEDDriverApplication
z General Purpose Constant Current Source
z LEDSignage andDisplay
z Architectural andDecorative LEDLighting
z LED Street Lighting
Ordering Information
RT6010
Pin Configurations
Package Type
S :SOP-16
(TOP VIEW)
Lead Plating System
G : Green (Halogen Free and Pb Free)
16
VCC
DIM/PWM_IN
RT
VSS
2
3
4
5
6
7
8
15
14
13
12
11
10
9
PWM_OUT
RT_OUT
EN
Note :
D_OSC
F_DELAY
FAULT
Richtek products are :
CS2
GATE2
GATE1
CS1
` RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
` Suitable for use in SnPb or Pb-free soldering processes.
NC
DPS
SOP-16
Copyright 2012 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DS6010-00 March 2012
www.richtek.com
1