®
RT5759
9A, 6.5V, 1MHz, ACOTTM Synchronous Step-Down Converter
with I2C Interface
General Description
Features
Dramatically Fast Transient Response
Steady 1MHz 20% Switching Frequency
Advanced COT Control Loop
The RT5759 is a high-performance, synchronous step-
down DC-DC converter that can deliver up to 9A output
current from a 3V to 6.5V input supply. The output voltage
can be programmable from 0.6V to 1.5V with I2C controlled
7-Bits VID.
Optimized for Ceramic Output Capacitors
3V to 6.5V Input Voltage Range
Integrated 12mΩ/8mΩ MOSFETs
Internal Start-Up into Pre-Biased Outputs
Power Good Indicator
The device integrates low RDS(ON) power MOSFETs,
accurate 0.6V reference and an integrated diode of
bootstrap circuit to offer a very compact solution.
Enable Control
The RT5759 adoptsAdvanced Constant On-Time (ACOTTM)
control architecture that provides ultrafast transient
response and further reduce the external-component
count. In steady states, the ACOTTM operates in nearly
constant switching frequency over line, load and output
voltage ranges and makes the EMI filter design easier.
The RT5759 offers automatic PSM that maintains high
efficiency during light load operation. The RT5759 can also
operate in Forced-CCM through I2C setting that helps meet
tight voltage regulation accuracy requirements.
Over-Current and Over-Temperature Protections
Under-Voltage Protection with Hiccup Mode
VID Control Range Via I2C Compatible Interface :
0.6V to 1.5V step = 10mV
Applications
Mobile Phones and HandheldDevices
STB, Cable Modem, and xDSL Platform
WLANASIC Power / Storage (SSDand HDD)
General Purpose for POL LV Buck Converter
TV
The device offers a variety of functions for more design
flexibility. The switching frequency, current limit level and
over temperature threshold are selectable via I2C.
Independent enable control input pin and power good
indicator are also provided for easy sequence control.
Besides, the designers can also command the device to
be enabled or shutdown via the I2C interface.
Ordering Information
RT5759
Package Type
QUF : UQFN-13L 3x3 (FC) (U-Type)
Lead Plating System
G : Green (Halogen Free and Pb Free)
The device offers Independent enable control input pin and
power good indicator for easily sequence control. To
control the inrush current during the startup, the device
provides a programmable soft-start up by an external
capacitor connected to the SS pin. Fully protection
features are also integrated in the device including the
cycle-by-cycle current limit control, UVP, input UVLO and
OTP.
Note :
Richtek products are :
RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
Suitable for use in SnPb or Pb-free soldering processes.
The RT5759 is available in a thermally enhanced UQFN-
13L 3x3 (FC) package.
Copyright 2018 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DS5759-00 August 2018
www.richtek.com
1