RT5510
Audio Amplifier with IV Sense
General Description
Features
Class-D Speaker AMP
The RT5510 is a boosted BTL class-D amplifier with V/I
sensing. A built-in DC-DC step-up converter is used to
provide efficient power for class-D amplifier with
multi-level class-G operation. The digital audio
interface supports I2S, left-justified, right-justified, TDM
and DSP A/B format for audio in with a data out used
for chip information like voltage sense and current
sense, which are able to be monitored via DATAO
through proper register setting.
4.8W Output Power @ 9.5V, 8 Load, THD < 1%
6.5W Output Power @ 9.5V, 4 Load, THD < 1%
0/3/6/9/12/15/18dB Boost Gain
20V Output Noise
Add DRE to Reduce Output Noise
Boost Converter
Adaptive Boost for Speaker, Boost from
Battery Supply Up to Programmed Voltage,
Max 9.5V
Ordering Information
Accurate Input Current Limit
Analog Part : Current Sense, Slope
Compensation, Feedback ADC
Alternate Mode Supported
Digital Part : Voltage Loop and End-Point
Prediction in Boost Mode
RT5510
Package Type
WSC : WL-CSP-30B 2.25x2.60 (BSC)
Note :
Richtek products are :
Digital
RoHS compliant and compatible with the current
Digital Audio Interface Support I2S,
Left-Justified, Right-Justified, TDM and
DSPA/B
requirements of IPC/JEDEC J-STD-020.
Suitable for use in SnPb or Pb-free soldering
processes.
Flexible Interrupt Controller
Clip Control (Battery Safeguard) to Prevent
Drawing Larger Current from Battery When
Low VBAT
Applications
Smart Phone
Tablet
Watchdog to Monitor Application Process
Status and Shutdown the System
Volume Control
RoHS Compliant and Halogen Free
Simplified Application Circuit
IOVDD 1.8V
VBAT
L
BST
C
INB
SDA
SCL
Control
Interface
LX
OUTP
RT5510
DATAI
LRCK
BCK
OUTN
VREF
Audio Interface
C
VREF
DATAO
AGND
DGND PGND BGND
Copyright © 2019 Richtek Technology Corporation. All rights reserved.
is a registered trademark of Richtek Technology Corporation
DS5510-00 October 2019
www.richtek.com
1