RS844X
32V, 3.8MHz Rail-to-Rail Output
CMOS Operational Amplifier
1 FEATURES
3 DESCRIPTIONS
The RS844X families of products offer high voltage
(32V) operation and rail-to-rail output, as well as
excellent speed/power consumption ratio, providing an
excellent bandwidth (3.8MHz) and slew rate of 15V/us.
The op-amps are unity gain stable and feature an ultra-
low input bias current.
•
•
HIGH GAIN BANDWIDTH: 3.8MHz
INPUT OFFSET VOLTAGE: ±0.8mV
(Typical)
•
•
•
•
•
QUIESCENT CURRENT: 0.44mA/Amp
Rail to Rail Output
Supply Range: 3V to 32V
SPECIFIED UP TO +125°C
Micro SIZE PACKAGES: SOT23-5, SOIC-
8(SOP8), MSOP-8, SOIC-14(SOP14),
TSSOP-14
The input can operate normally within the negative
power rail to 1.5V below of the positive power rail. Input
signals beyond the supply rails do not cause phase
reversal. The RS844X families of operational amplifiers
are specified at the full temperature range of −40°C to
+125°C under single power supplies of 3V to 32V or dual
power supplies of ±1.5V to ±16V.
2 APPLICATIONS
•
•
•
•
•
SENSORS
PHOTODIODE AMPLIFICATION
ACTIVE FILTERS
Device Information (1)
PART NUMBER
PACKAGE
BODY SIZE(NOM)
TEST EQUIPMENT
RS8441
SOT23-5
SOIC-8(SOP8)
MSOP-8
2.90mm x 1.60mm
4.90mm x 3.90mm
3.00mm x 3.00mm
DRIVING A/D CONVERTERS
RS8442
SOIC-14(SOP14) 8.65mm x 3.90mm
TSSOP-14 5.00mm x 4.40mm
RS8444
(1) For all available packages, see the orderable addendum at the end
of the data sheet.
REV A.1
1 / 19
www.run-ic.com