RS1T45
1-Bit Dual-Supply Bus Transceiver with Configurable
Voltage Translation and 3-State Outputs
1 FEATURES
3 DESCRIPTIONS
•
•
•
Control Input threshold Referenced to
VCCA Voltage
The RS1T45 is 1-bit non-invertingbus transceiver uses two
separate configurable power supply rails. The A port and
DIR are designed to track VCCA, which supporting operating
voltages from 1.65V to 5.5V, and the B port supporting
operating voltages from 1.65V to 5.5V while it tracks the
VCCB supply. This allows for universal low-voltage
bidirectional translation between any of the 1.8V, 2.5V,
3.3V and 5V voltage nodes.
Power-Supply Range:
VCCA and VCCB:1.65V to 5.5V
VCC Isolation: If Either VCC is at GND, Both
Ports are in the High-Impedance State
Low power consumption,4μA Max
Output drive up to ±24mA@3.0V
No Power-Supply Sequencing Required:
Either VCCA or VCCB can be Ramped First
IOFF: Supports Partial-Power-Down Mode
Operation
•
•
•
The RS1T45 is designed for asynchronous communication
between two data buses. The logic levels of the direction-
control (DIR) input activate either the B-port outputs or the
A-port outputs. The device transmits data from the A bus to
the B bus when the B-port outputs are activated and from
the B bus to the A bus when the A-port outputs are
activated. The input circuitry is always active on both A and
B ports and must have a logic HIGH or LOW level applied
•
•
Extended Temperature: -40°C to +125°C
2 APPLICATIONS
•
•
•
•
Industrial
Enterprise
Telecom, such as VOIP
Personal electronic
to prevent excess ICC and ICCZ
.
The RS1T45 is available in Green SOT23-6 and SC70-6
packages. It operates over an ambient temperature range
of -40°C to +125°C
.
Device Information(1)
PART
NUMBER
PACKAGE
BODY SIZE (NOM)
SOT23-6(6)
2.92mm×1.60mm
2.10mm×1.25mm
RS1T45
SC70-6
(SOT363) (6)
(1) For all available packages, see the orderable addendum at the end
of the data sheet.
4 Functional Block Diagram
A
4
B
REV A.2
1 / 19
www.run-ic.com