RS1G125-Q1
RS1G125-Q1 Single Bus Buffer Gate With 3-State Output
1 FEATURES
3 DESCRIPTIONS
The single buffer is designed for 1.65V to 5.5V VCC
operation. The RS1G125-Q1 device is single line
driver with 3-state output. The output is disabled
•
•
•
•
•
Qualified for Automotive Applications
AEC-Q100 Qualified with the Grade 1
Operating Voltage Range:1.65V to 5.5V
Low Power Consumption:1µA (Max)
Operating Temperature Range:
-40°C to +125°C
̅̅̅̅
when the output-enable (OE) input is high.
This device is fully specified for partial-power-down
applications using Ioff. The Ioff circuitry disables the
outputs, preventing damaging current backflow
through the device when it is powered down.
•
•
•
Inputs Accept Voltage to 5.5V
±24mA Output Drive at VCC=3.0V
Micro SIZE PACKAGES: SOT353(SC70-5)
To ensure the high-impedance state during power up
̅̅̅̅̅
or power down, OE should be tied to VCC through a
pullup resistor, the minimum value of the resistor is
determined by the current-sinking capability of the
driver.
2 APPLICATIONS
•
•
•
•
•
Qualified for Automotive Applications
Increase Digital Signal Drive Strength
Infotainment
The RS1G125-Q1 is available in Green SOT353(SC70-
5) packages. It operates over an ambient temperature
range of -40°C to +125°C.
ADAS
HEV/EV Inverter
Device Information (1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
Simplified Schematic
SOT353
(SC70-5)(5)
RS1G125-Q1
2.10mm×1.25mm
1
OE
(1) For all available packages, see the orderable addendum at the
end of the data sheet.
2
4
A
Y
4 FUNCTION TABLE
INPUTS
OUTPUT
Y
̅̅̅̅
퐎퐄
A
L
L
H
L
H
L
H
X
Z
H=HIGH Logic Level
L =LOW Logic Level
X=Don’t Care
Z=High-impedance OFF-state
REV A.1
1 / 13
www.run-ic.com