RP114x SERIES
300 mA LDO REGULATOR
OUTLINE
No.EA-236-190130
The RP114x is a CMOS-based voltage regulator IC with high output voltage accuracy, low supply current, low
dropout, and high ripple rejection. This IC consists of a voltage reference unit, an error amplifier, resistors for
setting output voltage, a short current limit circuit, a chip enable circuit, and so on. The RP114x features a
minimum input voltage from 1.4V and the output voltage, which can be set from 0.8V to 3.6V (in 0.1V step).
The output voltage of this IC is internally fixed. This IC perform with low dropout voltage due to built-in transistor
with low ON resistance. Low supply current and a chip enable function prolong the battery life of each system.
The ripple rejection, line transient response and load transient response of the RP114x is excellent, thus this
IC is very suitable for the power supply for hand-held communication equipment. Since the packages for this
IC are DFN(PLP)1010-4、DFN(PLP)1010-4B、SC-88A、SOT-23-5, therefore high density mounting of the IC
on boards is possible.
FEATURES
Supply Current................................................................Typ. 50µA
Standby Current .............................................................Typ. 0.1µA
Input Voltage Range.......................................................1.4V to 5.25V
Output Voltage Range(1) .................................................0.8V to 3.6V (0.1V steps)
Output Voltage Accuracy ................................................1.0% (VSET>2.0V, Ta=25C)
Temperature-Drift Coefficient of Output Voltage.............Typ. 80ppm/C
Dropout Voltage..............................................................Typ. 0.25V (IOUT=300mA, VSET=2.8V)
Ripple Rejection .............................................................Typ. 75dB (f=1kHz)
Line Regulation...............................................................Typ. 0.02%/V
●
Packages ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ DFN(PLP)1010-4、DFN(PLP)1010-4B、
SC-88A、SOT-23-5
Built-in Fold Back Protection Circuit...............................Typ. 60mA (Current at short mode)
Ceramic capacitors are recommended to be used with this IC ...... 1.0µF or more
APPLICATIONS
Power source for portable communication equipment.
Power source for electrical appliances such as cameras, VCRs and camcorders.
Power source for battery-powered equipment.
(1) For other voltages, please refer to Product-specific Electrical Characteristics.
1