• 2:1 input voltage range
• 1.6kVDC isolation
Features
DC/DC Converter
• UL certified
• Efficiency up to 91%
• Six-sided continuous shield
• No minimum load required
Regulated
Converter
RP10-A
10 Watt
1“ x 1“
Single and Dual
Output
Description
3
The RP10-A series are wide input voltage range 1”x1” power DC/DC converters. Despite their small
size, the RP10-A converters are fully specified devices with built-in Class A EMC filters, no minimum
load, 1.6kVDC isolation, under-voltage lockout and low ripple/noise figures. The outputs are fully
protected against short circuits, overcurrent and overvoltage and can be trimmed over a 10ꢀ range.
The RP10-A series will find many uses in applications where board space is at a premium as no
external components are required.
Selection Guide
Part Number
Input
Output
Voltage Range Voltage
Output
Current
[mA]
3000
2000
830
670
416
3000
2000
830
670
416
3000
2000
830
670
416
1000
416
333
Input (1) Efficiency (1) Max. Capacitive
Current
[mA]
typ.
[%]
Load (2)
[µF]
3500
2500
430
350
125
3500
2500
430
350
125
3500
2500
430
350
125
1440
250
180
[VDC]
9-18
9-18
9-18
9-18
[VDC]
3.3
5
12
15
24
3.3
5
12
15
24
3.3
5
12
15
24
5
RP10-123.3SA (2,3)
RP10-1205SA (2,3)
RP10-1212SA (2,3)
RP10-1215SA (2,3)
RP10-1224SA (2,3)
RP10-243.3SA (2,3)
RP10-2405SA (2,3)
RP10-2412SA (2,3)
RP10-2415SA (2,3)
RP10-2424SA (2,3)
RP10-483.3SA (2,3)
RP10-4805SA (2,3)
RP10-4812SA (2,3)
RP10-4815SA (2,3)
RP10-4824SA (2,3)
RP10-1205DA (2,3)
RP10-1212DA (2,3)
RP10-1215DA (2,3)
RP10-2405DA (2,3)
RP10-2412DA (2,3)
RP10-2415DA (2,3)
RP10-4805DA (2,3)
RP10-4812DA (2,3)
RP10-4815DA (2,3)
994
969
933
931
914
485
484
456
465
457
243
239
230
233
229
969
935
925
484
462
463
239
229
231
83
86
89
90
91
85
86
91
90
91
85
87
90
90
91
86
89
90
86
90
90
87
91
90
9-18
18-36
18-36
18-36
18-36
18-36
36-75
36-75
36-75
36-75
36-75
9-18
RoHS2
+
REACH
compliant
compliant
10 from 10
E196683
UL60950-1 certified
EN55032 compliant
9-18
9-18
12
15
5
12
15
5
18-36
18-36
18-36
36-75
36-75
36-75
1000
416
333
1000
416
333
1440
250
180
1440
250
180
12
15
Notes:
Note1: Maximum values at nominal input voltage and full load
Note2: Max. Cap load is tested at nominal input and full resistive load
Model Numbering
RP10-__ __ _A/_-_
“Package (4)”
nom. Input Voltage
nom. Output Voltage
“CTRL Logic (3)”
Single or Dual
Notes:
Note3: add suffix ”P” for CTRL function with positive logic (1=ON, 0=OFF) and Trim pin
add suffix “N” for CTRL function with negative logic (0=ON, 1=OFF) and Trim pin
or add suffix “XC” for omitted CTRL pin and Trim pin (refer to “Dimension Drawing (mm)”)
Note4: add suffix “-HC” for premounted Heat-sink with clamps
Ordering Examples
RP10-1205SA/P = 12V input, 5V output, single, positive Logic CTRL pin
RP10-4805DA/XC-HC = 48V input, 5V output, dual, without CTRL pin, Heat-sink premounted
www.recom-power.com
REV.: 6/2020
PD-1